Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Ariens Project #4

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
jrtrebor


Location: Michigan - 3 hours north of Chicago on the lake
Joined: Feb 10, 2010
Points: 539

Ariens Project #4
Original Message   Oct 15, 2011 9:35 pm
Finished redoing the dash on my blower
The new Honda 13hp engine I got to repower the blower (again)
was in great shape. Has the electric start and a 10A charging coil.
But it didn't have any of the wiring. No key switch, no rectifier, nothing.
All the factory stuff is way out of my budget so It had to go old school.
With an ignition on/off switch. (The old one that was still on the blower)
And a starter push button. Which meant that I had to rewire the whole
ignition system from the engine to the dash.
That is how things got started.
Then being the way I am, I couldn't just run new wire and leave it at that.
What's the fun it that. Anyway it's finished.
Just need to get a new impeller bearing and flanges and I can put the whole blower
back together and mate it to the tractor.


This message was modified Oct 18, 2011 by a moderator
Replies: 1 - 58 of 58View as Thread
Replies: 1 - 58 of 58View as Thread
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42