Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Picked up my Pro 28!

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
mvedepo


Joined: Oct 1, 2011
Points: 32

Picked up my Pro 28!
Original Message   Nov 15, 2011 11:11 am
This thing is a monster!  Though it's huge the balance is awesome. Also I can't emphasis enough how smooth this engine is.  Very impressed.  Can't wait to give her a go!  









This message was modified Nov 15, 2011 by mvedepo
Replies: 29 - 38 of 43Next page of topicsPreviousNextNext page of topicsAllView as Outline
borat


Joined: Nov 10, 2007
Points: 2692

Re: Picked up my Pro 28!
Reply #29   Nov 18, 2011 9:08 am
Steve_Cebu wrote:
A video would be cool.


I'm hoping this year to be able to use myToro's joystick controlled shoot to nail those PITA chipmunks that we have everywhere. It won't kill them but I'm hoping it will make them move before they finish destroying my yard.


Yeah.......

You sure they're not squirrels?   Any chipmunks I've seen hibernate during winter.  Never seen one out in the snow yet.  Show us some pics of your winter chipmunks.  I'd like to see that. 
Steve_Cebu


Joined: Dec 17, 2009
Points: 888

Re: Picked up my Pro 28!
Reply #30   Nov 18, 2011 11:44 am
borat wrote:
Yeah.......

You sure they're not squirrels?   Any chipmunks I've seen hibernate during winter.  Never seen one out in the snow yet.  Show us some pics of your winter chipmunks.  I'd like to see that. 


Every so often you'll see one out in the winter but not often. They do hibernate but right now we have an awful lot of them prepping for winter. If you want to see a video of chipmunks right now it's easy as they are all out in force. They were out during that freak snowstorm we had last month as well. When I blow teh leaves I see a great many holes from them, sure some are probably mice and snakes but we have a LOT of munks here. If I can get a video of them in the winter I'll post it on YouTube and put the link on here.

"If you have more miles on your snow blower than your car, you live in New England."  "If you can drive 75 mph through 2 feet of snow during a raging blizzard without flinching, you live in New England."
Dr_Woof


Don't blow into the wind, and don't eat yellow snow. WOOF!

Location: Saskatchewan
Joined: Dec 13, 2010
Points: 253

Re: Picked up my Pro 28!
Reply #31   Nov 18, 2011 12:05 pm
Be very VERY careful with that.  Just look at wat happened to Mr jrtebor!

royster


" It is the use of power tools that separates man from animals"

Location: New Brunswick, Canada
Joined: Feb 11, 2011
Points: 284

Re: Picked up my Pro 28!
Reply #32   Nov 22, 2011 9:52 am
  After seeing your  PRO 28 here, I wanted to see one . I went to my Husqvarna-Ariens -MTD  dealer.   This is a large dealer with over 60 machines in the showroom,  something for everyone.

He had a Ariens PRO 32 on display.   .The  PRO32  model in Canada is powered by a Briggs 342 ,1650 torque engine.  (not Polar Force)   Surprisingly,  he only had a few  MTD machines that had Chinese engines, and he said that the Chinese engines are flatly rejected , people demand a Briggs engine.

All of the Husqvarna and Ariens had   Briggs engines,  . And the Briggs 342, 1650 is the largest engine engine available in the Husqvarna and Ariens models

Your machine with the 420 would have more power than the PRO models here.  

This message was modified Jan 15, 2012 by royster


mvedepo


Joined: Oct 1, 2011
Points: 32

Re: Picked up my Pro 28!
Reply #33   Nov 22, 2011 2:14 pm
My feeling is that if the the engine said Polar Force by Shanghai Engines then I would be concerned.  The fact that Briggs puts their name on the engine tells me that there is quality control being done by Briggs at the point of manufacturing.  I doubt they would want to attach their name to a junk engine.  As for the Polar Force name it means nothing,  Briggs has nothing to do with that.  Polar Force is the name Ariens attaches to the engine for marketing purposes.    So don't get confused and think that all Polar Force engines are made in China.   In fact I do believe that the only snowblower engines from Briggs are AREN'T made in China are the 305 and 342.  If that is wrong I am sure Snowman will set it straight. 
Snowmann


Joined: Dec 3, 2003
Points: 494

Re: Picked up my Pro 28!
Reply #34   Nov 22, 2011 5:29 pm
royster wrote:
  After seeing your  PRO 28 here, I wanted to see one . I went to my Husqvarna-Ariens -MTD  dealer.   This is a large dealer with over 60 machines in the showroom,  something for everyone.

He had a Ariens PRO 30 on display.     , The  only difference is that this model in Canada is powered by a Briggs 342 ,1650 torque engine.  (not Polar Force)   Surprisingly,  he only had a few  MTD machines that had Chinese engines, and he said that the Chinese engines are flatly rejected , people demand a Briggs engine.

All of the Husqvarna and Ariens had   Briggs engines,  . And the Briggs 342, 1650 is the largest engine engine available in the Husqvarna and Ariens models

Your machine with the 420 would have more power than the PRO models here.  



There is no such thing as a Pro 30, you must be referring to a 32 or 36. Also, the models sold in Canada are the same as in the US. You were either looking at a non-current model or a 12V keystart model (the 12V start version of the Briggs model 25 snow engine is not yet available). That is, the Briggs model 25 snow engine (420cc) is available in Canada on Ariens Pro machines (120V start only).

royster


" It is the use of power tools that separates man from animals"

Location: New Brunswick, Canada
Joined: Feb 11, 2011
Points: 284

Re: Picked up my Pro 28!
Reply #35   Nov 22, 2011 9:38 pm
You are right,   I went back to the dealer again, It is a Pro32
This message was modified Jan 15, 2012 by royster


bus708


Location: Maryland
Joined: Jul 24, 2010
Points: 321

Re: Picked up my Pro 28!
Reply #36   Jan 15, 2012 3:38 pm
I was wondering if you got a chance to use it yet? I'm sure all of us want to read your review of your beast and see it on u-tube.
scopes01


Location: Montreal, CANADA
Joined: Nov 27, 2011
Points: 22

Re: Picked up my Pro 28!
Reply #37   Jan 15, 2012 7:12 pm
Hi Bus 708

I also have an Ariens 2011-12 Professional 28 with a Briggs & Stratton 420cc motor. I am from Montreal, CANADA and recently we got little over 10" of snow...The snowblower is very agile and easy to manoeuvre...the Hilliard Auto-Lok differential works great and very easy to turn/steer. The motor is very smooth and starts very easily with only one light pull. Overall I am really happy with the machine and don't regret buying it...However, I must say that I am somewhat dissapointed with the way the chute operates...I find the design poor and not quite suited for a commercial grade machine...It is flimsy and doesn't lock in place properly when blowing snow. I went over the service manual and tried to adjust it...but it is what it is..I am considering perhaps in modifying it or install the chute system from the other Ariens models like the Deluxe model...It is a turn crank system from the top and it is rigid and stays in one place. Besides that....it is a very beautiful machine. Haven't considered making a video yet..maybe one day I will...Take care!...scopes01

RedOctobyr


Location: Lowell area, MA
Joined: Nov 5, 2011
Points: 282

Re: Picked up my Pro 28!
Reply #38   Jan 15, 2012 7:49 pm
scopes01, I played with a Pro machine in a store a month or so ago. I was curious how that chute-steering system worked, since you only had to move the lever left/right, but you did not have to, for instance, squeeze anything to unlock it first. If I remember correctly, there was a little locking mechanism underneath the control panel, which was spring-loaded. As you started to push the lever, the spring-loaded lock pulled away, and you could aim the chute. When you stopped applying pressure to the lever, the lock re-engaged. Am I remembering this right? Is the problem that it doesn't really lock back into place, and the chute can rotate on its own, while blowing snow?

It's sort of funny you mention possibly going to the Deluxe method. I actually looked at the Deluxe approach and thought it seemed like a rather non-ergonomic design. You had to kind of lean forward, beyond the control panel, and turn a crank using a little offset section in the middle of the rod. It didn't really strike me as being an improvement over the old method of just having a crank on the control panel, say. But maybe it's at least more secure than the quick-lever on the Pros.

Please don't take any of this the wrong way, they seem like awesome machines (especially with the big engine), and are much more advanced than mine. But it does seem like perhaps the different companies are still working to try and perfect the new-style chute controls.
Replies: 29 - 38 of 43Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42