Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > SeaFoam test

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
trouts2




Location: Marlboro MA
Joined: Dec 8, 2007
Points: 1328

SeaFoam test
Original Message   Dec 26, 2009 11:52 am

   SeaForm makes many claims about what it can do. 

 

Injector cleaner

Carburetor cleaner

Carbon cleaner,

Fuel stabilizer

Frees lifters – rings

De-icer anti-jell

Upper cylinder lub

Dries oil and fuel

Cleans carbon as you drive.

Cures hesitations ,stalls, pings, and rough idle due to carbon buildup.

Cleans dirty engine part internally by removing harmful gums, varnish and carbon.  WORKS AND PERFORMS INSTANTLY. 

 

   That’s quite a versatile list of claims.  Given the repeated claim for carbon it should do something when contacting carbon.

 

  SeaFoam says 1 pint treats 25 gallons.  That’s a mix of 200 to 1.  If it can clean at that mix it should dissolve carbon easily at full strength.  Below is a picture of carbon put in a class with full strength SeaFrom for several hours with occasional shaking.  There is no breakup of the particles. 

 

   The other picture of a head and piston with carbon.  The loose carbon was wiped off and the rags dipped with SeaFoam and rubbed on the head and piston.  The rags are slightly discolored but not from dissolved particles.  The discolor is just picked up particles of carbon a rag without SeaFoam will pick up. 

 

   Given that it did not dissolve carbon full strength and would not remove carbon with a rag directly on a piston and head it seems doubtful that at a mix or 200 to 1 it will do very much rushing over the head and piston of an engine. 

 

   SeaFoam does not seem to do anything. What went wrong here?  No dissolved carbon in the glass and only slight smudging on the rags with no removal of carbon from the head or piston after rubbing.  What’s going on?  If it does not do anything at full strength how can it work at 200 to 1 where only slight fraction of the 200 to 1 mix will actually contact the carbon when an engine is running
This message was modified Dec 26, 2009 by trouts2
Replies: 32 - 41 of 43Next page of topicsPreviousNextNext page of topicsAllView as Outline
kipsy


Joined: Dec 23, 2004
Points: 14

Re: SeaFoam test
Reply #32   Jan 3, 2010 4:20 pm
got snow all day today while buffalo was playing on CBS. tried to get the honda hs521 going but wouldnt start. 4-5 plunges of the ariens 824 primer and off i go. later in the day, thought id clean up another 3-6 inches with the honda. still no start. got the 1 year old never used can of seafoam spray off the storage rack and squirted some in the carb area, dont even know if it went in the hole. 3 pulls later the honda is back to life.

2004 jd lt180 m42 deck 2000 ariens 824 1987 honda 5s21 1995 honda push mower 2005 honda 25cc trimmer
mikiewest


Joined: Dec 29, 2007
Points: 262

Re: SeaFoam test
Reply #33   Jan 3, 2010 4:44 pm
I read online if you mix 1oz. of seafoam w/8oz. of O.J. it will clean any crud,carbon,undigested meat in your intestines....lol..
JohnnyBoyUpNorth


Location: New Brunswick Canada
Joined: Dec 30, 2007
Points: 72

Re: SeaFoam test
Reply #34   Jan 3, 2010 5:15 pm
I was told that it had the power to pull North America out of this economic slump. If anything can do it, Seafoam can. I keep a can with me at all times.

Contents under pressure....
mikiewest


Joined: Dec 29, 2007
Points: 262

Re: SeaFoam test
Reply #35   Jan 3, 2010 5:24 pm
johnnyboy...it'll take 2cans per directions....
newjerseybt


You want it done right?...You better learn how to do it yourself!

Ariens 1128DLE
Ariens 8526LE
Honda HRC216
Bosch 3221L
Craftsman DYT4000
Stihl FS90R


Location: Honesdale, PA
Joined: Dec 19, 2004
Points: 171

Re: SeaFoam test
Reply #36   Jan 3, 2010 10:22 pm
trouts2 wrote:
Borat:  Sounds like you might be skeert to find out!</p><p>The above is pretty weird Borat , get a grip.  Posed over here with all silly stuff.  </p><p>You need to re-read the posts about RPMs.  If you are quite positive about how Toro configures their Brigs engines RPM and have an issue with 3300 RPM then you should contact the factory reps and their tech pub department.
--------
Borat is OK...it's just a minor personality quirk. I have my own ideosynchrosies but I find I need to work at taming them else I would have a lot less friends in the world. ;')

To make this Seafoam Test more scientific will take additional labor and another head gasket but will adding some in the gas tank and running the machine have different results? It may possibly work similar to water injection. Just my 2 cents.
oldcrow


If it ain't broke, try harder

Location: Northern MI
Joined: Jan 15, 2008
Points: 63

Re: SeaFoam test
Reply #37   Jan 22, 2010 1:15 am
Another 2-cents:

Just a guess here, but could it be possible that Seafoam requires heat in order for a catalytic reaction to take place? Like, say, in a combustion chamber?  As far as what the stuff does at room temp, it definitely does not seem to be any super-solvent.

I'm not a Seafoam advocate, nor do I use it very often. I've tried it, but haven't been impressed with the results. Your mileage may vary. Like trouts2 said, the can claims it does everything but put on your coat and light your cigarette for you - golly gee-whiz! I didn't buy the ad copy, but I've used it a few times based upon recommendations from others. Didn't hurt, but didn't seem to help much either.

I asked my brother (a marine mechanic) about this stuff once, and he told me it works OK if you have heavy carbon build-up, but there are cheaper - and more effective - decarbonizers out there. He also said save your money if you think Seafoam is going to unclog a dirty carb, refresh stale gas, or remove moisture from fuel lines. That's what he said. The guy's been in the business for over 18 years, and gets paid pretty well to know what he's doing.

Although I'm no advocate, I figure the stuff must have some worth for so many folks to swear by it. One thing's for sure, though - the manufacturer is making serious money on this product. I wonder if any un-biased organization has ever really taken Seafoam's claims to task? A future Consumer Reports project, perhaps?
This message was modified Jan 22, 2010 by oldcrow
whitetail


Joined: Dec 28, 2005
Points: 46

Re: SeaFoam test
Reply #38   Jan 22, 2010 12:06 pm
My SeaFoam test was last week end on an old Arctic Cat W/ Kawasaki 440 engine. The sled was not run for about 6-7 years. we put fresh mix into tank and it fired right up then ran it for an hour or so, brought it back to shop we put Seafoam direct into carb till engine stopped- let it sit for 15 min. Started and it smoked for about 2 miles. It made a big difference in power and sound of engine. Where it would pick up frontend on acceleration .Cheapest tune-up I've come accross for carboned up engines.
trouts2




Location: Marlboro MA
Joined: Dec 8, 2007
Points: 1328

Re: SeaFoam test
Reply #39   Jan 22, 2010 1:27 pm
   How did you determine there was carbon buildup problem to start with?  If there was one how do you know it was cleared after?  The additive may just have been in when something else cleared. 

   You let it run for an hour but probably not at high speed so not sucking much gas through.  You did not mention cleaning the carb.  Is it possible with the later running it may have passed some crud and it ran better?  Seafoam is fairly oily and may have helped pass some dirt through. 

This message was modified Jan 22, 2010 by trouts2
borat


Joined: Nov 10, 2007
Points: 2692

Re: SeaFoam test
Reply #40   Jan 22, 2010 1:35 pm
Think I'll just sit this round out.
whitetail


Joined: Dec 28, 2005
Points: 46

Re: SeaFoam test
Reply #41   Jan 22, 2010 8:49 pm
The machine was running  full  throttle after during warm up and for over an hour it's a 2 cycle and the only way to keep plugs clean is run them. The carb was NOT cleaned it was run dry before
storing . I FOLLOWED manufactures instructions on Seafoam can. When put up against another machine same course same day and only difference was Seafoam. Sled performance increased.
Seafoam works for me.
This message was modified Jan 22, 2010 by whitetail
Replies: 32 - 41 of 43Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42