Vacuum Cleaners Discussions

Is it TTI or still Panasonic?

CarmineD wrote:

Now, as Moderator-

Does this underlined sentence have anything to do w/the actions of the moderator or the workings of this site?  Just give me a "Yes" or "No".  That is all I want.

You have been here long enough to know how things work.  You have been given  much freedom.  I could have easily "censored" the things you have posted, as you would think I do, but have not.  I have even left things you wrote about me.  Its all still there.  Not the mean monster as you want to believe.

Mike W,
Moderator

Mike_W wrote:

Completely False statements Mike.  Your money, your opinion, buy and like what you want.  

I haven't used the Electrolux Nimble yet, but I tried.  I saw it and turned on.  I posted here several weeks weeks ago about it.  Not sure what you read and inferred.  When I was at Lowe's on other business, I stopped by the vacuum aisle to scope out the Nimble.  It was new and on display but w/o the dirt bin cover.  Couldn't use it, no suction.  Can't praise it yet.  Have to wait and see.

BTW, I bought 2 new HOOVER Z's.  Still in use.  One in a commercial setting.  It is their go to vacuum.  Never bought a SEARS LG Permalite.  Even when it was discountinued and selling for $69 new.  HARDSELL put it correctly here.  He said and I quote:  It is a POS.  If I'm not mistaken I even agreed with him here.  Every now and then even he gets it right.  When he does, I tell him so.

Carmine D.

CarmineD wrote:
I can't recall acomment on the LG.  I would likely remember if you said I was correct.  However, I may have made that comment about the "Z".

HARDSELL wrote:

It's on this site about the Permalite.  Same place as Mike's comments. You said that the Permalite is a POS.  POS is your phrase and word which you use here often.  Not just for the Z, tho I must admit you never it [HOOVER Z] that.  Read my other post here to you and you'll understand what I said about you. And like I said, I think I even responded back to you in agreement on the Permalite.  I would remember because I don't say that I agree with you very often.  AND I have your words here to me that I NEVER forget anything [especially when it is about vacuums].  You're right there too.

Carmine D.

OMG!!!!

I didn't want to start a new thread so I just kept this one going since it's pertaining to the Kenmore Can.......Mine is about 3 and a half years old..........I buy those envirocare synthetic cloth bags........

Yesterday I went to change the bag, opened the bin and the bag had COMPLETELY slipped off the collar............It was a mess..........This has happened to me three or four times in the past and I have been SOOO careful when putting them on....... I had to get the Rainbow out to clean the inside of the Kenmore..........

After cleaning, I changed all three filters. Hepa, Chamber, and Bag.........I can't for the life of me figure out how these bags continue to slip off........I thought the first couple of times it was my fault because I didn't have them very secure or something, but this last time I was so careful in that it was on properly..........I'm the only one that uses this machine and it hasn't been turned over or anything to cause the bag to slip off......

You should have SEEN the inside of the bin.

Is there anything I can use to keep this from happening? I put some packaging tape on it in such a way that I think it will stay, but I don't know if anyone has a better method.

mark40511 wrote:

More like "Houston, we have a problem."  I highlighted parts of your message that are significant for diganosis and response.

Your last question first:  Stop using the Envirocare bags.  Convert to Ultracare bags.

Question 1:  Is this condition limited to this one package or have you had several packages of these same Envirocare bags do the same thing: slip off the bag holder?

Question 2:  Is the bag collar plastic or cardboard?

Question 3:  Have you gotten all/most of the dirt that bypassed the bag and pre-motor filter out of the motor compartment?

Carmine D.

Here are the bags I use, and if they don't slip of the collar, they are FABULOUS.....No loss of suction as the bag fills, and no trace of dirt/dust in the bin

The collar is cardboard, but the odd thing is that it's a really SNUG fit

This is not limited to this package. This has happened with other packages in the past as well. I think it's happened to me like three times

The motor safety chamber filter HOPEFULLY protected the motor since that was obviously the ONLY thing keeping the dirt from getting sucked right into the motor. The motor still sounds fine.


To be honest, I can't remember but I think this has also happened with the DVC microlined paper bags one time on me as well.....I could be wrong on that. I have used those in the past as well.

As it is now, when I put the new envirocare bag on, I taped it and then tried to slip it off the collar and it won't come off unless I take the tape off or pull really hard, so hopefully that will help........


http://www.totalvac.com/A137.html

Question 3:  Have you gotten all/most of the dirt that bypassed the bag and pre-motor filter out of the motor compartment?


Forgot to answer this

I don't know HOW I would get any dirt that bypassed the chamber filter since I don't know how to take a vacuum apart.

mark40511 wrote:

Short of taking apart and cleaning, I suggest:  With a new bag installed, pre-motor filter in place, remove the post motor, or exhaust filter.  With vacuum running, stop the suction opening by cupping your hand over it.  Remove your hand and continue repeating the hand blocking procedure.  Note if and how much dirt is coming out of the exhaust opening of the vacuum.  If dirt is doing so, continue running, using your hand to block the suction opening and unblock the opening until all/most of the dirt emitted from the exhaust subsides. 

Carmine D. 

Of course it goes without saying that the above procedure for clearing the motor compartment dirt is done outdoors. 

WRT terminology, the bag collar is the cardboard/plastic part of the bag that slips on and locks into the vacuum's bag holder.  If the collar is coming off [the bag not the bag holder] then the the problem is a defective bag.  Usually the glue holding the collar on the bag is stale, insuffient, and won't hold.  If the bag collar is slipping off/out of the bag holder, as is your case, the bag is not made securely enough to be used in your vacuum, without modification.  Hence, I recommend using the Ultracare brand of bags in your case.  But it's up to you.

Carmine D.