Abby's Guide to Vacuum Cleaners
Username Password
Home Discussions Reviews More Guides
Abby’s Guide > Vacuum Cleaners > Discussions > LG Electronics Kompressor Plus 300B

Vacuum Cleaners Discussions

Search For:
CarmineD


Joined: Dec 31, 2007
Points: 5894

LG Electronics Kompressor Plus 300B
Original Message   May 27, 2010 7:13 pm
 
 

LG Electronics Kompressor® Plus  $399 at HOME DEPOT

Description

Pick Up More, Empty Less. LG is introducing its first ever line of vacuums in the U.S. Market. LG patented Kompressor® technology utilizes the world's first motorized compression system and a larger bin to compress the dust intake to hold more household dust than non-compressor models.

This has been talked about here and appears to have finally made it to the USA market.

Carmine D.

This message was modified May 28, 2010 by CarmineD
Replies: 30 - 39 of 79Next page of topicsPreviousNextNext page of topicsAllView as Outline
CarmineD


Joined: Dec 31, 2007
Points: 5894

Re: LG Electronics Kompressor Plus 300B
Reply #30   Sep 22, 2010 7:33 am
Venson wrote:
Hi Cramine,

LG is promoting the new uprghts on its claim that they are capable of managing three times more dust containment than most bagless vacuums due to the Kompressor set-up which compresses collected dirt and debris into "dust cakes".  This is said to mean that you can clean up to three rooms before having to dump the machine's collection bin.  This may bring debate by way of persons who aren't big on bothering about emptying bagless vacs as prescribed but for us "book followers" it's a comfort to know.

As I mentioned prior, the Kompressor flap swings side to side to compact dust, dirt and debris the machine has sucked up and most interesting, just above the compression area in the collection bin LG has put a different spin on cyclonics.  Instead of the usual horizintal air cycling, LG has employed a vertical spin for dust separation to take better advantage of gravity in the process.  The really great features are easy access to the cyclone area from either side plus the user maintainable pre- and HEPA filters.  Put both under a good flow of just plain old cool tap water, let them dry (out of direct sunlight of course) and you're good to go.  One HEPA and two pre-filters come with either machine and LG estimates you'll have about a good two-and-one-half years before needing to get new ones.

Differences are marked between the two but both models have the same vertical cyclonic systems, edge cleaning, filtering and dust capture capacity.  The high-end Model 300 has a forty-foot cord and for that reason no cord reel. Also, its hose bears battery-operated RF (radio frequency) switches to control its three speed motor  plus turn the machine and or its revolving brush on or off.  A main switch on the base of the machine can be used if batteries in the hose handle need replacement.

Best,

Venson


Thanks for the info Venson.  Let me recap: Vertical cyclones, cord winder/40 foot cord with no winder, easy access to cyclones for washing, 3X more dirt capture than usual for bagless vacuums before bin dumping, honesty about filters' life with no nonsensical claims about lifetime guarantees, suction controls/regulators.  Did I miss anything?

What are your thoughts the belt and brush features? 

Carmine D.

Venson


Joined: Jul 23, 2007
Points: 1900

Re: LG Electronics Kompressor Plus 300B
Reply #31   Sep 22, 2010 9:00 am
CarmineD wrote:
Thanks for the info Venson.  Let me recap: Vertical cyclones, cord winder/40 foot cord with no winder, easy access to cyclones for washing, 3X more dirt capture than usual for bagless vacuums before bin dumping, honesty about filters' life with no nonsensical claims about lifetime guarantees, suction controls/regulators.  Did I miss anything?

What are your thoughts the belt and brush features? 

Carmine D.


Hi Carmine,

That about covers it.  I haven't elaborated much on the "Dual Force" airways in the brush chamber as I have not seen them in action.  The claim is that they enhance edge cleaning. 

Maintenance for the belt and brushroll is quite easy.  You simply flip the cleaner and undo the six screws that hold the base plate in place.

Venson

vacmanuk


Location: Scotland UK
Joined: May 31, 2009
Points: 1162

Re: LG Electronics Kompressor Plus 300B
Reply #32   Sep 22, 2010 12:45 pm
Venson wrote:
Hi Carmine,

That about covers it.  I haven't elaborated much on the "Dual Force" airways in the brush chamber as I have not seen them in action.  The claim is that they enhance edge cleaning. 

Maintenance for the belt and brushroll is quite easy.  You simply flip the cleaner and undo the six screws that hold the base plate in place.

Venson


A brush plate that requires 6 screws to be undone to get into it isn't easy in my book!
Venson


Joined: Jul 23, 2007
Points: 1900

Re: LG Electronics Kompressor Plus 300B
Reply #33   Sep 23, 2010 12:46 am
vacmanuk wrote:
A brush plate that requires 6 screws to be undone to get into it isn't easy in my book!


Hi vacmanuk,

It's a new world unfortunately.  Many vacuum manufacturers to all appearance don't want us doing anything that they coupd perfectly well charge us for. 

Personally, I'd love to see the clips and levers used in many older American upright vacs like the Hoover Convertibles and Dial-A-Matics come back.  Belt and brush roll maintenance was a breeze as no tools were required.  Yet, I suspect that such convenience is considered too costly to provide by current makers.  (Also, i have a sneaking suspicion they don't want end-users being too self-sufficient.)

I had often bragged that I could knock down and reassemble any vacuum made since 1952 but the thought in regard to my S7 sets me shaking in my shoes.  You can't just go to your kitchen drawer and pull out a screwdriver for slotted or Phillips head screws.  A "special" screwdriver is needed that most of us don't know where to locate or buy.  That's why I see LG's six screws with ordinary heads easy to deal with. 

Best,

Venson

Venson


Joined: Jul 23, 2007
Points: 1900

Re: LG Electronics Kompressor Plus 300B
Reply #34   Sep 23, 2010 12:46 am
vacmanuk wrote:
A brush plate that requires 6 screws to be undone to get into it isn't easy in my book!


Hi vacmanuk,

It's a new world unfortunately.  Many vacuum manufacturers to all appearance don't want us doing anything that they coupd perfectly well charge us for. 

Personally, I'd love to see the clips and levers used in many older American upright vacs like the Hoover Convertibles and Dial-A-Matics come back.  Belt and brush roll maintenance was a breeze as no tools were required.  Yet, I suspect that such convenience is considered too costly to provide by current makers.  (Also, i have a sneaking suspicion they don't want end-users being too self-sufficient.)

I had often bragged that I could knock down and reassemble any vacuum made since 1952 but the thought in regard to my S7 sets me shaking in my shoes.  You can't just go to your kitchen drawer and pull out a screwdriver for slotted or Phillips head screws.  A "special" screwdriver is needed that most of us don't know where to locate or buy.  That's why I see LG's six screws with ordinary heads easy to deal with. 

Best,

Venson

CarmineD


Joined: Dec 31, 2007
Points: 5894

Re: LG Electronics Kompressor Plus 300B
Reply #35   Sep 23, 2010 7:17 am
Venson wrote:
Hi Carmine,

That about covers it.  I haven't elaborated much on the "Dual Force" airways in the brush chamber as I have not seen them in action.  The claim is that they enhance edge cleaning. 

Maintenance for the belt and brushroll is quite easy.  You simply flip the cleaner and undo the six screws that hold the base plate in place.

Venson



Thanks for the info Venson.  Recapping: Bagless with 1/3 less bin dumps, washable cyclones and filters [both pre-post motor], user friendly belt and brush roll service [if you don't mind time/trouble of using a standard household screwdriver].  3 level motor sucton controls.  $250-$350 price range for least to best.

One more question:  Comparing LG Kompressor to dyson DC28 [$599] and what do you think?  A run for the money?

Carmine D.

Venson


Joined: Jul 23, 2007
Points: 1900

Re: LG Electronics Kompressor Plus 300B
Reply #36   Sep 23, 2010 9:36 am
CarmineD wrote:
Thanks for the info Venson.  Recapping: Bagless with 1/3 less bin dumps, washable cyclones and filters [both pre-post motor], user friendly belt and brush roll service [if you don't mind time/trouble of using a standard household screwdriver].  3 level motor sucton controls.  $250-$350 price range for least to best.

One more question:  Comparing LG Kompressor to dyson DC28 [$599] and what do you think?  A run for the money?

Carmine D.



Hi Carmine,

That's really a hard one.  LG is a new kid on the block when it comes to vacuums in the U.S.  Though I am not a fan of Dyson, it has the obvious advantage of longer, larger press and market exposure and certainly way more word of mouth.  Bagless vacs are now of growing interest to shoppers.  LG's advantage is the offering of two somewhat less expensive bagless uprights with potentially useful features and longer than usual warranties for non-niche vac brands.  I've been speaking to folks here and there and lot of them have a hard time wrapping their heads around the idea of three-, four- or five-hundred dollars for a vacuum cleaner.

Maybe it's due to locale.  I'm not up on what costs are like beyond my immediate area.  In New York City, everything is expensive.  If you're keeping a car, premium gas is about $3.10 a gallon while across the river in New Jersey it runs as low as $2.69.  If you're walking, the subway's $2.25 a trip and  I won't even get into rent, food and clothing prices. Oh yeah -- sales tax is 8.875 percent.  With all that in mind, launching two new vacuums in the $300 to $400 range could prove a daunting task. 

What I'd like to see is LG get on the bandwagon and take a chance on HSN.  They'd get to sell and advertise nationwide in one fell swoop.  However, since HSN demos, sells and spotlights product, what are the gains and losses of the manufacturers making use of it?

Venson

Venson


Joined: Jul 23, 2007
Points: 1900

Re: LG Electronics Kompressor Plus 300B
Reply #37   Sep 24, 2010 3:22 am
Venson wrote:
Hi Carmine,

. . .  What I'd like to see is LG get on the bandwagon and take a chance on HSN.  . . .

Venson



My error -- the LuV300 is on HSN at standard $399 price.

Venson

vacmanuk


Location: Scotland UK
Joined: May 31, 2009
Points: 1162

Re: LG Electronics Kompressor Plus 300B
Reply #38   Sep 24, 2010 5:56 am
Venson wrote:
Hi vacmanuk,

It's a new world unfortunately.  Many vacuum manufacturers to all appearance don't want us doing anything that they coupd perfectly well charge us for. 

Personally, I'd love to see the clips and levers used in many older American upright vacs like the Hoover Convertibles and Dial-A-Matics come back.  Belt and brush roll maintenance was a breeze as no tools were required.  Yet, I suspect that such convenience is considered too costly to provide by current makers.  (Also, i have a sneaking suspicion they don't want end-users being too self-sufficient.)

I had often bragged that I could knock down and reassemble any vacuum made since 1952 but the thought in regard to my S7 sets me shaking in my shoes.  You can't just go to your kitchen drawer and pull out a screwdriver for slotted or Phillips head screws.  A "special" screwdriver is needed that most of us don't know where to locate or buy.  That's why I see LG's six screws with ordinary heads easy to deal with. 

Best,

Venson


Well I dont think every manufacturer is doing that though Venson. I think some brands are looking at similar ways to SEBO or Dyson to remove stuff from floor heads. Certainly Vax have the right idea on their Mach Air lightweight vacuum, one of the better functions on it for example is that the floor head cover just comes off via two plastic clips when the roller brush requires cleaning.

This message was modified Sep 24, 2010 by vacmanuk
CarmineD


Joined: Dec 31, 2007
Points: 5894

Re: LG Electronics Kompressor Plus 300B
Reply #39   Sep 24, 2010 7:47 am
Venson wrote:
Hi Carmine,

That's really a hard one.  LG is a new kid on the block when it comes to vacuums in the U.S.  Though I am not a fan of Dyson, it has the obvious advantage of longer, larger press and market exposure and certainly way more word of mouth.  Bagless vacs are now of growing interest to shoppers.  LG's advantage is the offering of two somewhat less expensive bagless uprights with potentially useful features and longer than usual warranties for non-niche vac brands.  I've been speaking to folks here and there and lot of them have a hard time wrapping their heads around the idea of three-, four- or five-hundred dollars for a vacuum cleaner.

Maybe it's due to locale.  I'm not up on what costs are like beyond my immediate area.  In New York City, everything is expensive.  If you're keeping a car, premium gas is about $3.10 a gallon while across the river in New Jersey it runs as low as $2.69.  If you're walking, the subway's $2.25 a trip and  I won't even get into rent, food and clothing prices. Oh yeah -- sales tax is 8.875 percent.  With all that in mind, launching two new vacuums in the $300 to $400 range could prove a daunting task. 

What I'd like to see is LG get on the bandwagon and take a chance on HSN.  They'd get to sell and advertise nationwide in one fell swoop.  However, since HSN demos, sells and spotlights product, what are the gains and losses of the manufacturers making use of it?

Venson

Venson wrote:
My error -- the LuV300 is on HSN at standard $399 price.

Venson



Hi Venson:

I'm not surprised to learn HSN is selling the latest LG upright.  Tho I've not seen it debut on the air/demoed by HSN.  I suspect it will once the LG vacuums are more pervasive in the big box retailers in the USA. 

You've touched on a number of cogent points with regard to LG and dyson.  LG is in my view looking not just for the new bagless customers but those disenchanted with existing bagged and bagless vacuums including dyson.  Hence, the additional LG selling features, like cord winder, motor suction controls, and dirt bin compression to reduce trips to the trash can.  With a price, tho high by BBR standards, competitive with the competition.

WRT LG name recognition for vacuums.  A smart seller will say LG makes and brands bagless vacuums for SEARS and has for quite sometime.  LG is a huge presence in large  household appliances and electronics worldwide while most vacuum makers are just limited to vacuums.  This has sales appeal to most buyers especially those with LG appliances already who are happy with them. 

Have to wait and see if indies become interested in the LG bagless. 

Carmine D.

This message was modified Sep 24, 2010 by CarmineD
Replies: 30 - 39 of 79Next page of topicsPreviousNextNext page of topicsAllView as Outline
Vacuum Cleaners Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42