Abby's Guide to Plasma TVs
Username Password
Home Discussions Reviews More Guides

Member Profile


Name Monte Rindlisbacher
Email Address private
Personal Quote
Privileges Normal user
Points 3
Number of Posts 3
Number of Reviews 0
Date Joined Dec 10, 2009
Date Last Access Dec 10, 2009 7:28 am
mkrind's last  
Re: Carb issue
#1   Dec 10, 2009 7:28 am
"hisses" menaing that it is drawing air back and forth, not even coming close to pull any gas up into the throat.
Carb issue
#2   Dec 10, 2009 7:27 am
I have a newer snow blower.  It has a primer.  When I push the primer, I normally hear gas being drawn and injected into the throat of the carb.  I do not.  It simply "hisses".  Any ideas?  I drained my gas tank but failed to drain the bowl from last year, if that helps.  Newb, I know!  Thanks Monte
Re: When I press the Primer bulb gas squirts on the floor.
#3   Dec 10, 2009 7:24 am
I had a backwards issue.  I am pressing the primer bulb and I am not getting ANY fuel to inject into the carb throat.  It sounds like air hissing back and forth.  I popped the carb off, float is loose, the needle looks good, w/o taking it out.  Nothing seems to be clogged yet the hissing comes from this port that I believe you all are talking about is where the excess gasoline escapes when over primed,  THis does not seem normal to me.  Is there a check of some kind that may be tarnished over or something?  Please let me know. Thanks.
Plasma TVs Guide   •   Discussions  Reviews   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2020 All rights reserved.
Site by Take 42