Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Snow at last!

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
jrtrebor


Location: Michigan - 3 hours north of Chicago on the lake
Joined: Feb 10, 2010
Points: 539

Snow at last!
Original Message   Dec 31, 2011 10:34 pm
Happy New Year to everyone

"Hooray"
Snows on it's way to central western Michigan.


Winter Storm Warning
Statement as of 9:42 PM EST on December 31, 2011

... Winter Storm Warning remains in effect from 10 am Sunday to
8 PM EST Monday...

Hazardous weather...

* rain and snow will transition to all snow by noon Sunday. The
   snow will continue through Monday.

* Potential for snow accumulations of at least 8 inches across
   portions of the warning area by Monday evening. Localized
   heavier snow bands near little and big Sable points along
   with much of Van Buren and Allegan counties could lead to
   amounts over a foot.

* It will become very windy late Sunday morning with wind gusts
   expected to reach 50 to 60 mph through Sunday night. This
   will cause considerable blowing snow.

Impacts...

* near blizzard conditions possible.

* Snow covered to icy Road conditions developing by mid
   afternoon Sunday and lasting through Monday due to snow...
   blowing snow and falling temperatures.

* Power outages and downed tree limbs likely Sunday and Sunday
   night due to very strong winds.


This message was modified Dec 31, 2011 by jrtrebor
Replies: 52 - 61 of 84Next page of topicsPreviousNextNext page of topicsAllView as Outline
MN_Runner


Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: Snow at last!
Reply #52   Jan 14, 2012 9:12 am
I should be jealous about snow but it is nice not having to blow the snow.  No major snow for another few weeks and we got lucky this week.
RedOctobyr


Location: Lowell area, MA
Joined: Nov 5, 2011
Points: 282

Re: Snow at last!
Reply #53   Jan 20, 2012 1:09 pm
We got maybe 1-2" of light fluffy stuff overnight. Gave me an excuse to try the little SS again. Granted, this storm played right to its strong suit (a mild storm, with very lightweight snow). But it was really nice. It was quicker than using the 2-stage (or a pusher shovel), not to mention easier. It was blowing as quickly as I wanted to walk with it, so it was actually really fast (my legs have a faster forward speed than my 2-stage does). This was the kind of storm where a 6hp, 30" machine would do great. You didn't need much power, just speed. So it was perfect. I can see why people like having 1 of each, if it's practical.
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Snow at last!
Reply #54   Jan 20, 2012 1:19 pm
I'm in Chicago suburbs.  Snow is coming down steadily, expecting 5-8" inches total by midnight.  It's the heavy, easy to pack type of snow.  Good thing it's snowing like this on Friday.  No rush to snowblow and the kids can play outside tomorrow. 

Now the big question is which snowblower to use tomorrow.  :)  I also have a 30" wide poly show pusher bought last winter that hasn't seen much action.
This message was modified Jan 20, 2012 by aa335
RedOctobyr


Location: Lowell area, MA
Joined: Nov 5, 2011
Points: 282

Re: Snow at last!
Reply #55   Jan 20, 2012 2:04 pm
aa335 wrote:
I also have a 30" wide poly show pusher bought last winter that hasn't seen much action.

Given the topics of this forum, if you decide to use the pusher instead of one of the snowblowers, you may want to keep it to yourself. OPE is Outdoor Power Equipment, not Outdated Push Exercise
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Snow at last!
Reply #56   Jan 20, 2012 2:59 pm
I didn't say I was going to use just the snow pusher.  Snow is golden at this time of the year, especially since we haven't seen much of it this winter.  I'm sure to get my OPE fix, even if I have to snowblow the neighbor's sidewalks.  :)  There's about 250 feet of it and those teenage boys aren't doing it by themselves.

I have 3 snowblowers but I still enjoy the exercise of shoveling by hand.  :)  Nothing to be ashamed of that. 
This message was modified Jan 20, 2012 by aa335
FrankMA


Location: Merrimack Valley/Northeastern Mass
Joined: Jul 1, 2010
Points: 587

Re: Snow at last!
Reply #57   Jan 20, 2012 3:27 pm
Finally got some snow like RedOctobyr was saying, about 3" total. Finally got a chance to use the venerable Honda HS621 Single Stage and was not very impressed to be honest. I think I'll have to take a look at tightening the tension on the belt or getting a new belt altogether. It threw the snow but not as robust as I would have expected and got clogged at the base of the chute several times. The snow was very light and fluffy so I did not expect the issues I encountered. It has to be a stretched belt that warrants an adjustment or replacement. Any other thoughts or suggestions???

Toro Wheel Horse 522xi GT, Honda HS928TA, Honda HS621AS, Honda HS520A, Toro CCR3000 (work in progress), Honda HS624WA (sold 08/23/2010), Stihl BR550 Backpack Blower, Stihl MS250, McCulloch MS1635, Honda EM6500SX Generator
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Snow at last!
Reply #58   Jan 20, 2012 4:21 pm
I think you're on the right track, it's either belt slip or low belt tension when bail is engaged that would cause clogging.  Check to make sure that the pulleys or belt are not coated with some kind of lubricant.  I've pushed my HS621 full bucket height into heavy snow and concrete mix at the EOD and never had clogging issues.  The engine will likely stall out under heavy load before clogging.  3" is light fluffy snow should not cause any clogging, in any machine.
This message was modified Jan 20, 2012 by aa335
RedOctobyr


Location: Lowell area, MA
Joined: Nov 5, 2011
Points: 282

Re: Snow at last!
Reply #59   Jan 20, 2012 6:19 pm
When it would clog, could you tell if the paddles were still spinning? Was anything coming out at all, or still getting flung around up front? If the belt was slipping that badly, I'd expect that the paddles might have stalled out entirely, and maybe you'd be able to see some evidence of that? If they had definitely stopped, then you're definitely chasing a belt issue, and you can narrow down the possible clogging causes.

With the fluffy snow, there wouldn't have been much resistance against them. Could you try pulling the plug wire (or killing ignition, etc), hold the bail down with something, and try rotating the paddles by hand? Can you tell if they can turn without the engine turning over with them? I replaced the belt in my Ariens while getting it ready for action. It did have a belt tension adjustment using the idler pulley, which I had to shift quite a bit to snug it up to the spec in the manual. Just trying to think of ways you can check the belt without opening the machine, as removing the cover on mine was a bit of a pain. Don't know if the Hondas are the same way.

Edit- Another option for checking the belt- With the engine off, hold the bail down with something to engage the paddles (I like zip ties). Stick something (a piece of wood, whatever) into the paddles to jam them up so they can't turn. Now pull the cord, and see if the engine can turn with the paddles stuck. That would let you put more torque on the belt than you could by simply fighting the engine's compression as you turn the paddles by hand. Plus you can't somehow lose a finger
This message was modified Jan 20, 2012 by RedOctobyr
FrankMA


Location: Merrimack Valley/Northeastern Mass
Joined: Jul 1, 2010
Points: 587

Re: Snow at last!
Reply #60   Jan 21, 2012 5:31 am
Thanks aa & Red. I'll check it today at some point when I have a chance. Going to be near a Honda dealer today so I may just stop in and get a new belt. I'd rather have one on hand when I remove the belt cover just in case it's needed. I actually meant to do this when I first got it but never got around to it. We're supposed to get up to 3" or so today so I'll be able to put it to the test when I'm done. I'll let you know how it goes.

Toro Wheel Horse 522xi GT, Honda HS928TA, Honda HS621AS, Honda HS520A, Toro CCR3000 (work in progress), Honda HS624WA (sold 08/23/2010), Stihl BR550 Backpack Blower, Stihl MS250, McCulloch MS1635, Honda EM6500SX Generator
MN_Runner


Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: Snow at last!
Reply #61   Jan 21, 2012 8:49 am
If you like you can generously spray silicone lubricant inside the chute starting from the base to exit.  If the belt is in a really bad shape, the inside of the belt should be hard and very slippery with burnt black stuff.  I was a bit surprized to learn that it does not take too much engage/disengage cycles to beat up the belt.  Hopefully the belt will do the trick.
Replies: 52 - 61 of 84Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42