Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Recall: Toro 421Q & 421QE (38588/38589)

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
allenm


Joined: Dec 29, 2010
Points: 8

Recall: Toro 421Q & 421QE (38588/38589)
Original Message   Jan 19, 2011 2:07 pm
Toro will have a recall this summer (2011) for Toro 421Q & 421QE (38588/38589).  The following problem affects models made in 2009, 2010, and 2011.  Toro has learned that Ethanol (used in all gas), is deteriorating aluminum parts within the carburetor.  These deteriorating parts break off inside the carburetor creating small fragments then clog areas inside the machine (ie. fuel line).  Gas will leak out of the snow blower into (ie. your garage).  The end result (gas leak) is similar to what happened on the Toro 180 power clear, but the problem is NOT the same.  Toro is aware of the problem and said they are working on a fix to be released this summer (2011) on the Toro 421Q & 421QE (38588/38589) snow blowers. 
 
If anyone is having a gas leak now, the current fix is only temporary.
This message was modified Jan 19, 2011 by allenm
Replies: 59 - 68 of 75Next page of topicsPreviousNextNext page of topicsAllView as Outline
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #59   Feb 7, 2011 12:17 pm
MN_Runner wrote:
That is a lot of work just to replace a sparkplug in 441Q.  I wonder if 221Q is similar as well.

4 screws for the chute, 5 screws for the top cover.   Seems pretty simple and straightforward to me.  3 minute job.  10mm socket and a phillips head screwdriver.  Spark plug changes are once a year at most.

It's only a snowblower, not a Ferrari.  Sometimes looking a parts diagram or instructions may be more complicated than it actually is.   My 5 year old can take it apart, the Toro, not the Ferrari.    He's blessed with curiosity.  :)  Still working on the finesse part, he likes to rip through it fast.
This message was modified Feb 7, 2011 by aa335
borat


Joined: Nov 10, 2007
Points: 2692

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #60   Feb 7, 2011 12:37 pm
I use a 1/2 drive cordless drill.  I put a 1/4" extension in the drill, attach suitably sized socket and can have the top off the Toro in probably one minute or less.   The Craftsman SS is far more difficult to take the cover off of.  It's got 11 screws along the back and sides, four more small bolts on the front and four more it you need to take the chute off. 

By comparison, the Toro is a monument to simplicity.  A chimpanzee could take it apart. 
MN_Runner


Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #61   Feb 7, 2011 8:09 pm
So you can gap the sparkplug, take the screws off, replace the sparkplug, then put the screws and schute back on in three min.  That is really good and fast.
MN_Runner


Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #62   Feb 7, 2011 8:13 pm
Wait - your son could probably do it in 5 min with a little help from you.  I just confirmed I am really slow.
borat


Joined: Nov 10, 2007
Points: 2692

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #63   Feb 7, 2011 8:18 pm
MN_Runner wrote:
So you can gap the sparkplug, take the screws off, replace the sparkplug, then put the screws and schute back on in three min.  That is really good and fast.

Who said that?

I said take the top off. 

I could do the whole job in under ten minutes.  Gapping the plug correctly would probably take most time.  Changing the plug could probably be done in five minutes if I wanted to hurry.   
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #64   Feb 7, 2011 8:30 pm
MN_Runner wrote:
Wait - your son could probably do it in 5 min with a little help from you.  I just confirmed I am really slow.

No, he can do it in 4:35. I just rounded up the time.  :)  All I have to do is bribe him, letting him work the paddle shifter on my car.  :)  He knows what redline is. 
This message was modified Feb 7, 2011 by aa335
MN_Runner


Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #65   Feb 7, 2011 9:38 pm
He can finish it before I can run a full mile.
Breather


Joined: Feb 8, 2011
Points: 2

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #66   Feb 8, 2011 3:27 pm
Hi,

I'm new here. I found this board recently. I heard something similar to the original poster about the Toro 421. I called two local dealers here in northeast Ohio yesterday to inquire about the 421Q. I'm debating between a 221 and a 421 myself. They both said they couldn't sell what they had on the floor until they received their repair kits from Toro. They both had the same story. The aluminum parts in the carb were being "eaten" by ethanol and that the plating on the needle valve was too "thin" to handle it which was causing it to flake off and clog the carb, thus causing it to leak. The repair kit consisted of a new needle valve, seat, and fuel line. Both dealers advised me to put a fuel shutoff valve on the snowblower if I bought it, which I would do on my own anyway.

Should I let these problems with the 421Q scare me away from it? I was leaning toward the 221Q but the significant other likes to do the driveway too when I'm away and has been complaining about "having another one that makes us stink from using it" and "having to mix the gas". Not like that's hard to do but she always complains about it.

This message was modified Feb 8, 2011 by Breather
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #67   Feb 8, 2011 4:00 pm
Breather wrote:

Should I let these problems with the 421Q scare me away from it? I was leaning toward the 221Q but the significant other likes to do the driveway too when I'm away and has been complaining about "having another one that makes us stink from using it" and "having to mix the gas". Not like that's hard to do but she always complains about it.


Either the 221Q or the 421Q is a good snowblower.  The 221Q has been around with the same proven engine for years so most people feel comfortable with it.

I wouldn't let the problems of the 421Q prevent you from buying one.  The fuel leak problem isn't as big as it seems.  You can put on a shut off valve easily to mitigate or lessen the leakage so it won't be hazardous.  You can choose to run the engine with the shut off valve closed until it stops so that there's no chance of any fuel leaking past the carb bowl.  The 421Q is a fine machine and I'm very impressed with the engine performance. 

Can your wife deal with potential fuel leak of the 421Q stinking up the garage from the fuel leak?  How comfortable is it for her to deal with a seeing a puddle of fuel on the floor?   What will she do?  Not use the snowblower and shovel by hand?

As far as the stink, you can get synthetic 2 cycle oil that has virtually no odor.  For the having to mix the gas, who's the one mixing?  If she's complaining about the mixing that she never does, that's a moot point.  You can have the gas mixed for her while you're away so only the "stink" issue remains.

There's always pros and cons.  Fortunately, the cons are easy to deal with.
borat


Joined: Nov 10, 2007
Points: 2692

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #68   Feb 8, 2011 4:38 pm
As Pepe Le Pew would say.....

Stink?  What stink? 

Personally, I like the smell of two cycle exhaust.  It reminds me of my youth racing two stroke enduro machines through the bush! 
Replies: 59 - 68 of 75Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42