Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Recall: Toro 421Q & 421QE (38588/38589)

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
allenm


Joined: Dec 29, 2010
Points: 8

Recall: Toro 421Q & 421QE (38588/38589)
Original Message   Jan 19, 2011 2:07 pm
Toro will have a recall this summer (2011) for Toro 421Q & 421QE (38588/38589).  The following problem affects models made in 2009, 2010, and 2011.  Toro has learned that Ethanol (used in all gas), is deteriorating aluminum parts within the carburetor.  These deteriorating parts break off inside the carburetor creating small fragments then clog areas inside the machine (ie. fuel line).  Gas will leak out of the snow blower into (ie. your garage).  The end result (gas leak) is similar to what happened on the Toro 180 power clear, but the problem is NOT the same.  Toro is aware of the problem and said they are working on a fix to be released this summer (2011) on the Toro 421Q & 421QE (38588/38589) snow blowers. 
 
If anyone is having a gas leak now, the current fix is only temporary.
This message was modified Jan 19, 2011 by allenm
Replies: 53 - 62 of 75Next page of topicsPreviousNextNext page of topicsAllView as Outline
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #53   Feb 3, 2011 8:21 pm
MN_Runner wrote:
Borat and AA335,

You guys made a modification to your snowblower so how does that affect your warranty? I am assuming you guys are not planning to take it in for any kind of service work since you are able mechanics.



Well my dealer said as long as I remove the big turbo kit, aftermarket exhaust, downpipe, and ecu before bringing it in, he doesn't care.
borat


Joined: Nov 10, 2007
Points: 2692

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #54   Feb 3, 2011 8:41 pm
No mods on the Toro.  I just  put on a removable tach  and set the governor to the correct rpm 4000 +/- 100 rpm. 

Unless there is a catastrophic failure of sorts, it will not be going in for service. 
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #55   Feb 4, 2011 11:40 am
shark007 wrote:
Called Toro in Canada.  They have solve the leak problem on the 421q model.  As long as your serial number starts with 311.

If you have an earlier model, they recommend to bring it to the dealer.


Details?  What was the fix?  It's like going to the car mechanic and he hands you a $500 repair bill, I want to know what was done.

Why would Toro of Canada recommend taking to the dealer if the machine doesn't have any leaks?
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #56   Feb 4, 2011 3:27 pm
CharlesW wrote:

Thank you!!!!
Some of the best news I have heard this week.
As you may have guessed, my serial number does start with 311.

Sorry to bust your bubble, but my snowblower serial number also starts with 311.  It was leaking!  I'd hold off the celebration until the summer.

Either Toro of Canada is wrong about the serial number cut off, shark007 conveyed the wrong information, or I'm just unlucky and have a leaking unit that begins with 311.  So unless we get official announcement from Toro, I would take any news from unofficial sources with a grain of salt.

Maybe this would give Toro a head's up to adjust their affected units, add me as another data point in the Failure Analysis database.


Anyone know what the Toro's serial number means as far as production date/month/year?
This message was modified Feb 4, 2011 by aa335
borat


Joined: Nov 10, 2007
Points: 2692

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #57   Feb 4, 2011 5:54 pm
Not sure how their serial no. work but here's an interesting link for the 421Q:

https://icontent.toro.com/smartmanuals/Toro_PowerClear4210_4Cycle/Proc20368.htm
MN_Runner


Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #58   Feb 6, 2011 5:06 pm
That is a lot of work just to replace a sparkplug in 441Q.  I wonder if 221Q is similar as well.
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #59   Feb 7, 2011 12:17 pm
MN_Runner wrote:
That is a lot of work just to replace a sparkplug in 441Q.  I wonder if 221Q is similar as well.

4 screws for the chute, 5 screws for the top cover.   Seems pretty simple and straightforward to me.  3 minute job.  10mm socket and a phillips head screwdriver.  Spark plug changes are once a year at most.

It's only a snowblower, not a Ferrari.  Sometimes looking a parts diagram or instructions may be more complicated than it actually is.   My 5 year old can take it apart, the Toro, not the Ferrari.    He's blessed with curiosity.  :)  Still working on the finesse part, he likes to rip through it fast.
This message was modified Feb 7, 2011 by aa335
borat


Joined: Nov 10, 2007
Points: 2692

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #60   Feb 7, 2011 12:37 pm
I use a 1/2 drive cordless drill.  I put a 1/4" extension in the drill, attach suitably sized socket and can have the top off the Toro in probably one minute or less.   The Craftsman SS is far more difficult to take the cover off of.  It's got 11 screws along the back and sides, four more small bolts on the front and four more it you need to take the chute off. 

By comparison, the Toro is a monument to simplicity.  A chimpanzee could take it apart. 
MN_Runner


Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #61   Feb 7, 2011 8:09 pm
So you can gap the sparkplug, take the screws off, replace the sparkplug, then put the screws and schute back on in three min.  That is really good and fast.
MN_Runner


Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #62   Feb 7, 2011 8:13 pm
Wait - your son could probably do it in 5 min with a little help from you.  I just confirmed I am really slow.
Replies: 53 - 62 of 75Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42