Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Recall: Toro 421Q & 421QE (38588/38589)

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
allenm


Joined: Dec 29, 2010
Points: 8

Recall: Toro 421Q & 421QE (38588/38589)
Original Message   Jan 19, 2011 2:07 pm
Toro will have a recall this summer (2011) for Toro 421Q & 421QE (38588/38589).  The following problem affects models made in 2009, 2010, and 2011.  Toro has learned that Ethanol (used in all gas), is deteriorating aluminum parts within the carburetor.  These deteriorating parts break off inside the carburetor creating small fragments then clog areas inside the machine (ie. fuel line).  Gas will leak out of the snow blower into (ie. your garage).  The end result (gas leak) is similar to what happened on the Toro 180 power clear, but the problem is NOT the same.  Toro is aware of the problem and said they are working on a fix to be released this summer (2011) on the Toro 421Q & 421QE (38588/38589) snow blowers. 
 
If anyone is having a gas leak now, the current fix is only temporary.
This message was modified Jan 19, 2011 by allenm
Replies: 48 - 57 of 75Next page of topicsPreviousNextNext page of topicsAllView as Outline
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #48   Jan 31, 2011 10:31 pm
It's done.  Just installed the shut off valve.

Since I only have two ounces of fuel in the tank, I drained through the carb bowl.  Used a pair of utility shears to cut the tubing at 2 inches from the carb.  Then I cut 1/2" off the fuel tank side, the same distance the fuel valve occupies, so that I don't add any slack into the fuel tubing length.  Slipped two tubing clamps on, then insert the fuel valve barbs into the tubing, making sure the flow direction arrow points towards the carb.  Reposition the clamps over the barbs and I was done.  Took about 10 minutes in total to install the valve.
This message was modified Jan 31, 2011 by aa335
shark007


Joined: Feb 3, 2011
Points: 1

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #49   Feb 3, 2011 5:21 pm
Called Toro in Canada.  They have solve the leak problem on the 421q model.  As long as your serial number starts with 311.

If you have an earlier model, they recommend to bring it to the dealer.

CharlesW


Joined: Jan 9, 2011
Points: 76

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #50   Feb 3, 2011 5:55 pm
shark007 wrote:
Called Toro in Canada.  They have solve the leak problem on the 421q model.  As long as your serial number starts with 311.

If you have an earlier model, they recommend to bring it to the dealer.


Thank you!!!!
Some of the best news I have heard this week.
As you may have guessed, my serial number does start with 311.
trouts2




Location: Marlboro MA
Joined: Dec 8, 2007
Points: 1328

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #51   Feb 3, 2011 6:38 pm
aa35>>>Anybody mod their carb bowl to add the thumbscrew drain screw?

No, but installed several of the push button, spring type.  They are easy to install and work fine.

MN_Runner


Location: St. Paul, Minnesota
Joined: Dec 5, 2010
Points: 622

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #52   Feb 3, 2011 6:54 pm
Borat and AA335,

You guys made a modification to your snowblower so how does that affect your warranty? I am assuming you guys are not planning to take it in for any kind of service work since you are able mechanics.

aa335


Joined: Nov 29, 2008
Points: 2434

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #53   Feb 3, 2011 8:21 pm
MN_Runner wrote:
Borat and AA335,

You guys made a modification to your snowblower so how does that affect your warranty? I am assuming you guys are not planning to take it in for any kind of service work since you are able mechanics.



Well my dealer said as long as I remove the big turbo kit, aftermarket exhaust, downpipe, and ecu before bringing it in, he doesn't care.
borat


Joined: Nov 10, 2007
Points: 2692

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #54   Feb 3, 2011 8:41 pm
No mods on the Toro.  I just  put on a removable tach  and set the governor to the correct rpm 4000 +/- 100 rpm. 

Unless there is a catastrophic failure of sorts, it will not be going in for service. 
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #55   Feb 4, 2011 11:40 am
shark007 wrote:
Called Toro in Canada.  They have solve the leak problem on the 421q model.  As long as your serial number starts with 311.

If you have an earlier model, they recommend to bring it to the dealer.


Details?  What was the fix?  It's like going to the car mechanic and he hands you a $500 repair bill, I want to know what was done.

Why would Toro of Canada recommend taking to the dealer if the machine doesn't have any leaks?
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #56   Feb 4, 2011 3:27 pm
CharlesW wrote:

Thank you!!!!
Some of the best news I have heard this week.
As you may have guessed, my serial number does start with 311.

Sorry to bust your bubble, but my snowblower serial number also starts with 311.  It was leaking!  I'd hold off the celebration until the summer.

Either Toro of Canada is wrong about the serial number cut off, shark007 conveyed the wrong information, or I'm just unlucky and have a leaking unit that begins with 311.  So unless we get official announcement from Toro, I would take any news from unofficial sources with a grain of salt.

Maybe this would give Toro a head's up to adjust their affected units, add me as another data point in the Failure Analysis database.


Anyone know what the Toro's serial number means as far as production date/month/year?
This message was modified Feb 4, 2011 by aa335
borat


Joined: Nov 10, 2007
Points: 2692

Re: Recall: Toro 421Q & 421QE (38588/38589)
Reply #57   Feb 4, 2011 5:54 pm
Not sure how their serial no. work but here's an interesting link for the 421Q:

https://icontent.toro.com/smartmanuals/Toro_PowerClear4210_4Cycle/Proc20368.htm
Replies: 48 - 57 of 75Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42