Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Anyone make their chute motorized??? To turn left and right....

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
JasonnB


Location: PA
Joined: Dec 9, 2007
Points: 26

Anyone make their chute motorized??? To turn left and right....
Original Message   Nov 27, 2010 4:56 pm
I saw a video of this once in youtube I think. A guy bought a cordless drill and attached ot the the auger handle. This let him control the auger left/right from a switch!
This message was modified Nov 28, 2010 by JasonnB
Replies: 3 - 12 of 17Next page of topicsPreviousNextNext page of topicsAllView as Outline
jrtrebor


Location: Michigan - 3 hours north of Chicago on the lake
Joined: Feb 10, 2010
Points: 539

Re: Anyone make their chute motorized??? To turn left and right....
Reply #3   Nov 29, 2010 12:00 am
This message was modified Nov 29, 2010 by jrtrebor
JasonnB


Location: PA
Joined: Dec 9, 2007
Points: 26

Re: Anyone make their chute motorized??? To turn left and right....
Reply #4   Nov 29, 2010 1:14 pm
Pics aren't displaying
JasonnB


Location: PA
Joined: Dec 9, 2007
Points: 26

Re: Anyone make their chute motorized??? To turn left and right....
Reply #5   Nov 29, 2010 1:28 pm
I found the write-up I was looking for! I have to try this!

Copy & paste to view:

http://toolmonger.com/2007/12/19/glove-winner-snow-blower-mods/

This message was modified Dec 31, 2010 by JasonnB
JasonnB


Location: PA
Joined: Dec 9, 2007
Points: 26

Re: Anyone make their chute motorized??? To turn left and right....
Reply #6   Dec 11, 2010 3:25 pm
Need some help. I'm told I need a dpdt switch to make the drill go forward and reverse. I found a switch in my basement, but I think it's the wrong kind, as it has 8 prongs on it and it super heavy duty.



Can anyone help? Also, this drill is variable speed, meaning the more you pres the trigger, the faster it goes. When I have the swtiched hooked up, I hope it just goes one speed, the fastest. Not sure how it will work?
Shryp


Location: Cleveland, OH
Joined: Jul 26, 2010
Points: 532

Re: Anyone make their chute motorized??? To turn left and right....
Reply #7   Dec 11, 2010 5:23 pm
DPDT switch should have 6 pins.  You should also get one that auto returns to center.
I believe the proper way to hook it up would be run the center 2 terminals to the motor, run the power source to one of the ends, then run jumpers making an X across the 4 corners.
This should hook the motor up to the center, the power to one side, and the power with reverse polarity to the other side.

Fuses between the power and the switch would be a good idea too.

I believe the variable speed in the drill is controlled by a resistor in the old switch, so using a new switch would eliminate that.
carlb


Joined: Nov 16, 2010
Points: 279

Re: Anyone make their chute motorized??? To turn left and right....
Reply #8   Dec 11, 2010 5:51 pm
Just make sure you get a DPDT monentary contact switch with a center off position.   These are readily available at Radio Shack for a few dollars.
This message was modified Dec 11, 2010 by carlb
GtWtNorth


https://t.me/pump_upp

Location: https://t.me/pump_upp
Joined: Nov 16, 2008
Points: 264

Re: Anyone make their chute motorized??? To turn left and right....
Reply #9   Dec 13, 2010 9:56 pm
Carlb & Shryp are right, you need a switch that automatically returns to the center or off position. When you use the switch, one side will rotate the motor in one direction and the other side will reverse the rotation.
Here is a little wiring diagram to help.(the black boxes are the switch terminals)



https://t.me/pump_upp
JasonnB


Location: PA
Joined: Dec 9, 2007
Points: 26

Re: Anyone make their chute motorized??? To turn left and right....
Reply #10   Dec 25, 2010 2:14 pm
Thanks, this looks like the one:

http://www.radioshack.com/product/index.jsp?productId=2062530

Now, see the trigger in the middle, where the red and black wires go into? I'm assuming I'm elimunating that? But, if you look at the end of that trigger, blue and yellow wires come out, and go to what's called a "cooling plate" that spiked thing in the back. I'm assuming that will be eliminated to?
Underdog


Joined: Oct 18, 2008
Points: 332

Re: Anyone make their chute motorized??? To turn left and right....
Reply #11   Dec 25, 2010 10:47 pm
Another option is to use an automotive seat motor. These can be found cheap (or free) at junk yards.

http://www.youtube.com/watch?v=qwbfkLuhdhw

JasonnB


Location: PA
Joined: Dec 9, 2007
Points: 26

Re: Anyone make their chute motorized??? To turn left and right....
Reply #12   Dec 31, 2010 12:26 am
Got it done, just need to mount the switch:

http://www.youtube.com/watch?v=NAlhaho2rPs

Also, I noticed that I do have an AC alternator with one lead coming off it, I think for a optional light, that I don't have. I would love to use this AC alternator to power the DV motor. I'm currently using the drill battery which is 18v.
This message was modified Dec 31, 2010 by JasonnB
Replies: 3 - 12 of 17Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42