Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Home made impeller kit

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
GtWtNorth


https://t.me/pump_upp

Location: https://t.me/pump_upp
Joined: Nov 16, 2008
Points: 264

Home made impeller kit
Original Message   Dec 3, 2008 10:21 pm
Since I had the auger assembly apart to replace bearings & bushings, I thought I would try my hand at fabbing an impeller kit. Already had all the materials laying around. I still have to put everything back together, but I can hardly wait till I can try it out. I used some 1/4 rubber sheet I had and hope it will last a while.

Don't know if will make any difference, but I thought it might be a good idea to bevel the leading edge to help shed the snow.





https://t.me/pump_upp
Replies: 13 - 22 of 23Next page of topicsPreviousNextNext page of topicsAllView as Outline
Bolack


Joined: Dec 13, 2007
Points: 10

Re: Home made impeller kit
Reply #13   Dec 19, 2008 6:46 pm
Hi Mr Denis

I see u from Mtl and u have french name..

I suppose u talk french too. because my english is poor and have a couples of questions

to impeller kit..

Its possible to post my request in french here or do u have email can i write to u.

Thx..

Roger

friiy


Location: Las Vegas, The Desert
Joined: Apr 12, 2008
Points: 600

Re: Home made impeller kit
Reply #14   Dec 19, 2008 7:05 pm
Our French here is horrible...  Try going to Google and Using French to English Translator...

Hope we can help,

La Friiy

Bolack


Joined: Dec 13, 2007
Points: 10

Re: Home made impeller kit
Reply #15   Dec 19, 2008 8:05 pm
When you install the rubber,
Does this rubber is touching the metal?
And if so happens is the light touch or with a big friction?
I have a snowblower MTD 8 HP.
Approximately what is the measure of your rubber pads
Thx for try to understand my questions ..
Roger
JohnnyBoyUpNorth


Location: New Brunswick Canada
Joined: Dec 30, 2007
Points: 72

Re: Home made impeller kit
Reply #16   Nov 18, 2009 8:45 am
GtWtNorth,

Curious to know how your home made kit made out. Did it hold up? Wear out? Balance issues? I am going to install something like that on one of mine, just wondering if you would do it again or go with Clarence's kit.

Thanks

John

Contents under pressure....
GtWtNorth


https://t.me/pump_upp

Location: https://t.me/pump_upp
Joined: Nov 16, 2008
Points: 264

Re: Home made impeller kit
Reply #17   Nov 19, 2009 9:54 am
JohnnyBoy,

They seemed to work very well although I can't compare before & after since I never used this machine before. No balance problems either, I tried to make sure all the parts were the same size to avoid imbalance. Not much wear either, when I installed, I tried to have them touch the sides, but only a minimum.

On a side note, I did move the rubber to the back of the blade when I did the final install. Had to use a second strip  of rubber to act as a spacer to clear the foldback on the lip of the impeller.

Cheers


This message was modified Nov 19, 2009 by GtWtNorth


https://t.me/pump_upp
JohnnyBoyUpNorth


Location: New Brunswick Canada
Joined: Dec 30, 2007
Points: 72

Re: Home made impeller kit
Reply #18   Nov 19, 2009 5:31 pm
Thanks for the reply. I'll likely put mine underneath as well. There's a clown in my neighbourhood who delivers bundles of store flyers. He seems to have been born from the genetic pool that Joe Montana and Stevie Wonder would create. Great arm, but not much accuracy. I find those bundles of flyers everywhere, lawn, bed of my truck, roof... nowhere is safe.

If I put it underneath, I might buy a little room for jamming instead of pinching the rubber backwards and creating worse mess.

Thanks again

John

Contents under pressure....
GtWtNorth


https://t.me/pump_upp

Location: https://t.me/pump_upp
Joined: Nov 16, 2008
Points: 264

Re: Home made impeller kit
Reply #19   Nov 19, 2009 6:57 pm
Salut Bolack

Tu peut ecrire en francais et je vais essayer de repondre le mieux que je peux (je suis un bloke et ma francais ecrit est horrible.)

Your english is very good, keep practicing, I don't think anyone here will critisize you. I can translate english to french and french to english if necessary better than most internet sites at least. I can always use the practice anyways.

Cheers

This message was modified Nov 19, 2009 by GtWtNorth


https://t.me/pump_upp
borat


Joined: Nov 10, 2007
Points: 2692

Re: Home made impeller kit
Reply #20   Nov 19, 2009 8:57 pm
JohnnyBoyUpNorth wrote:
Thanks for the reply. I'll likely put mine underneath as well. There's a clown in my neighbourhood who delivers bundles of store flyers. He seems to have been born from the genetic pool that Joe Montana and Stevie Wonder would create. Great arm, but not much accuracy. I find those bundles of flyers everywhere, lawn, bed of my truck, roof... nowhere is safe.<BR><BR>If I put it underneath, I might buy a little room for jamming instead of pinching the rubber backwards and creating worse mess.<BR><BR>Thanks again<BR><BR>John


I've hit a rolled up newspapers and flyers a few times with a snow thrower. Didn't know what was going on when it first happened, just that the snow changed colour and didn't fall nearly as fast. Lazy jerk paper boy had a habit of throwing the flyer bundles at my steps and didn't care if they ended up on the driveway. So when it snowed, you wouldn't know they were there. I knew where the kid lived, so one night when it was snowing pretty good, I took little walk by his house and threw four bundles of flyers in his drive way. The next morning, I was giddy with the prospect of taking a bit of stroll past his place. I waited until later in the day (gave lots of time for the kid's father to clear the driveway) then went for a walk. As I approached, I could see the tell tale signs of coloured paper spread over a fairly broad area. As I got closer, I noticed that the driveway was only half cleared and the snow thrower silently sitting in the driveway. I took a good look at it from the street and could see that it had a bundle of flyers jambed in the auger and impeller.

What was really aggravating was that I had spoken very politely to the kid (about 12 years old), and had asked him to put the flyers in the plastic bags supplied to him and to make sure they land on the steps. Not a chance. In the summer, the lazy little jerk would leave four or five bundles of the same flyers on our steps regardless of the weather. Rain wind or shine. If we were not there to take care of them, they'd be all over the neighbourhood. A few times I've had to round up soggy flyers hanging from trees and shrubs after a nasty storm. In the winter, if he did put an elastic around them, he'd just fire them from the neighbour's driveway toward our steps. He wasn't too keen walking over the snow bank or back down to the street to access our house. It got so bad that I reported him to the newspaper that employed him - six times! Nothing was done. Finally, I told the newspaper that I'd have the kid charged with trespassing and would involve the law if the the b.s. didn't stop. Since then, things have been good. No more flyer problems. Just about everyone on our street cancelled their subscription to the paper thanks to the inconsistent delivery that the kid provided as well as his dumping of flyers. Yeah.... That kid was a real gem.
opecrazy


Joined: Oct 8, 2009
Points: 30

Re: Home made impeller kit
Reply #21   Nov 19, 2009 10:20 pm
Borat that story was awesome!
GtWtNorth


https://t.me/pump_upp

Location: https://t.me/pump_upp
Joined: Nov 16, 2008
Points: 264

Re: Home made impeller kit
Reply #22   Nov 20, 2009 7:14 pm
"The next morning, I was giddy with the prospect of taking a bit of stroll past his place. I waited until later in the day (gave lots of time for the kid's father to clear the driveway) then went for a walk. As I approached, I could see the tell tale signs of coloured paper spread over a fairly broad area. As I got closer, I noticed that the driveway was only half cleared and the snow thrower silently sitting in the driveway. I took a good look at it from the street and could see that it had a bundle of flyers jambed in the auger and impeller."

Borat, you're my hero, that's what I call divine retribution. Did you ever consider writing short stories?

https://t.me/pump_upp
Replies: 13 - 22 of 23Next page of topicsPreviousNextNext page of topicsAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42