Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Just an observation

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
spottedpony


Joined: Aug 23, 2004
Points: 301

Just an observation
Original Message   Feb 1, 2006 11:39 am
I find it interesting that as highly rated as the Ariens blowers seem to be rated, that i see so many posts about them having problems. or breaking down. Ive paid attention for quite some time now & it seems always 30% to 40% of the posts are referencing a problem of some type with the Ariens & it seems to mainly be newer blowers. This brings to mind several questions, first and formost, if they are the quality they're reputation seems to hold, why are there so many problems with them? Is it only a matter of cutting quality to stay in a competitive price range while keeping profits as high as possible, or is it just poor quality control?  Even if this brand is the majority of blowers owned by people, 30+% seems to be an excessive amount of blowers having varied problems.Its understandable that after some years of use, parts wear out and repairs are necessare but since it seems to be mainly newer models with low hours on them having problems, it makes me wonder how much the quality has been reduced over comparable models say 10 years old, & they are relying soley on reputation for sales in todays market?
Replies: 5 - 13 of 13Next page of topicsPreviousAllView as Outline
oakville


Joined: Dec 6, 2005
Points: 92

Re: Just an observation
Reply #5   Feb 2, 2006 2:08 pm
I don't have problems.
spottedpony


Joined: Aug 23, 2004
Points: 301

Re: Just an observation
Reply #6   Feb 2, 2006 6:02 pm
Granted, i'll consede the percentage of posts concerning problems is probably due to the large ownership base vs other brands, but when i see such a large number of posts concerning problems not related to assembly /adjustment, or normal use,   in my  mind at least i still would have to question quality vs "riding on reputation"
plugger


Joined: Dec 14, 2004
Points: 39

Re: Just an observation
Reply #7   Feb 2, 2006 6:47 pm
Sounds like you've done a lot of research and may be onto to something.  I'd love to see the statistics you've collected showing the distribution of problems by type, (setup, normal wear, maintanence, infancy failure, design failures etc).  We might be able to prove one way or another whether or not Ariens is as good as it's reputation by comparing your research data against your data for other machines owned by members of this site.  At the moment the only statistic I have is I am happy with mine but if you can prove I'm wrong I'll consider selling it and getting the best snowblower I can afford.

Chevy  K1500,
Fisher 760LD,
Ariens 926LE Pro
EGreen


Location: Amherst (Buffalo), New York
Joined: Nov 4, 2005
Points: 57

Re: Just an observation
Reply #8   Feb 3, 2006 7:17 am
It might just be since there are more of them, more of them come on the net, or more of them "do it yourself" while other brand owners are far less DIY and maybe just take it to the dealer w/o checking it out themselves?  Its possible.  What you need to do is go to several dealers who service a wide array of blowers and see what they say.  My old dealer serviced many of all brands and the first thing he told me was to stay away from especially the newer Craftsmans, he said that MTD based machines seem to have a high fail right simply because they are light duty and shouldn't be used in areas that get dumped on.  He then steered me toward Toro, Ariens and he kept us away from honda because he knew our budget was limited :P  It all boils down to whats easiest for you to service, get dealer support from and parts.

I haven't read many problems that actually don't relate in some way to poor setup or testing.   When a machine is tested and setup properly the belts should last many years, gearcase many more, the engine even longer. Its all goes right back to the beginning of how it was tested and setup.  If something is causing excessive wear in one spot or not done right it will cause a problem.  When you look at the scope of things on a snow blower they are somewhat simple and only so much could go wrong.  Its all pulleys, gears, chains, and belts.  If something isn't checked or setup correctly with those then it could effect any number of things.

Ariens also has a 3 year warranty that covers all defects in workmanship and manufacturing and the point of the 3 years is because most likely "big problems" will fail in that time period and be rectified including problems from stuff not being adjusted right.

Tecumseh warranties their engines too and if its catostrophic engine failure should occur (and is from a manufacturer problem) it will fail in the first 2 hour breakin.  Thats what a tecumseh person told me at their toll free number.  When they throw rods its usually at the 15+ years, you read constantly my Tecumseh threw a rod...at age 25 or 30 or in my case Ihad one go at about 40 years, thats an awesome length of time to have engines run, and that 40years wasn't simple snow either, it was threw Buffalo, NY area winters.  If they die in the first 2 hours (or warranty) and it wasn't your fault for neglecting it, you get a new engine.

Garandman


Location: South Boston, MA
Joined: Mar 10, 2005
Points: 341

Re: Just an observation
Reply #9   Feb 3, 2006 8:52 am
spottedpony wrote:
Granted, i'll consede the percentage of posts concerning problems is probably due to the large ownership base vs other brands, but when i see such a large number of posts concerning problems not related to assembly /adjustment, or normal use,   in my  mind at least i still would have to question quality vs "riding on reputation"

Where are you seeing all these posts?

Ariens did redesign all their lines this year, but I haven't seen many posts which reflect teething problems in the new products. They've made great strides in a lot of areas. You probably don't notice but the illustrations in their newer parts catalogs are all derived from 3D CAD models, which shows they're keeping up with the Joneses, Lees, Lings, Takamotos, Schneiders, Torgits, and Nehrus....

I think if you asked an Ariens factory worker if they were resting on their reputation, they'd try to beat you up - except that mid-Westerners are generally more mellow than that. I see plenty of evidence they're making massive internal changes to compete with anybody, anywhere.  Rather than fold up the tents and move the operation overseas.
patsfan


Joined: Jan 19, 2003
Points: 495

Re: Just an observation
Reply #10   Feb 3, 2006 1:43 pm
      I read a lot of posts that blame poor setup for a lot of problems. This makes me wonder how much setup is involved. When I bought my Toro a few years agoI had to buy it online because I couldn't find any locally due to a big storm that cleaned everyone out.

      When it was delivered i had to assemble the handle,tractiong control linkage,chute control rod,and headlight.  Then it was just a matter of checking the tires and skid height,and filling the engine with gas & oil. I'm hardly a qualified mechanic,so it seems that anyone that can read should be able to setup a snowblower. 

     Problems such as belts,etc.would seem to be the manufacturer's problem,not the dealer's; unless it specifically relates to setup for that particular brand. I know that they are covered in the manual,but not under setup,so it falls back on the manufacturer.

                                                                        Just my $02

formerly OT
Garandman


Location: South Boston, MA
Joined: Mar 10, 2005
Points: 341

Re: Just an observation
Reply #11   Feb 4, 2006 5:45 pm
http://www.landscapemanagement.net/landscape/article/articleDetail.jsp?id=290993

LM Week in Review

BRILLION, WI — Ariens Co. will invest $6.5 million for manufacturing plant upgrades and a new production and engineering training facility. The company said its goal is to reduce delivery times for its walk-behind power equipment products, including its line of Sno-Thro machines.

“This investment will allow us to take on the challenges of worldwide sources of supply, and provide consumers and commercial landscape contractors with a truly American-built product,” said Dan Ariens, president of Ariens Co.

Four new powder-coating systems will be installed in the company’s Plant 3 location, allowing Ariens to convert raw materials to finished goods in a single location for all of the company’s walk-behind power equipment products, including Sno-Thro machines, walk-behind mowers and wheeled string trimmers.

Additionally, when the training facility is complete, each of the company’s plants will hold independent learning centers.

“The addition of this third training facility provides opportunities for all of our associates to learn the techniques of the Ariens Production System in a classroom setting, reinforcing what they are learning as part of hands-on training,” said Ariens.

EGreen


Location: Amherst (Buffalo), New York
Joined: Nov 4, 2005
Points: 57

Re: Just an observation
Reply #12   Feb 8, 2006 2:33 pm
patsfan wrote:
      I read a lot of posts that blame poor setup for a lot of problems. This makes me wonder how much setup is involved. When I bought my Toro a few years agoI had to buy it online because I couldn't find any locally due to a big storm that cleaned everyone out.

      When it was delivered i had to assemble the handle,tractiong control linkage,chute control rod,and headlight.  Then it was just a matter of checking the tires and skid height,and filling the engine with gas & oil. I'm hardly a qualified mechanic,so it seems that anyone that can read should be able to setup a snowblower. 

     Problems such as belts,etc.would seem to be the manufacturer's problem,not the dealer's; unless it specifically relates to setup for that particular brand. I know that they are covered in the manual,but not under setup,so it falls back on the manufacturer.

                                                                        Just my $02



The manual details what needs to be done in setup,  it states that a run in of the engine, to check to make sure it wont fail, adjust the carb, for smooth idle etc, for the blower itself its states to check pulleys/belts/friction wheel/friction disc/augars/implaller/drive speed/engagment of clutches and check for proper chute rotation and tension of the lines/belts.  Mine actually came with a seperate pamphlet for the chute control assembly.

Toro might do it differantly but it seems a majority of problems come from home depot and don't get rectified, instead just replaced with a new blower or it goes to a dealer and is charged for inproper setup, while as with a dealer they stand behind their product and run it through the paces to make sure it will last and wont have to come back for awhile.

faithfulFrank


He is no fool who gives up what he cannot keep
to gain what he cannot lose....


Location: Batavia, N.Y.
Joined: Jan 20, 2004
Points: 1067

Re: Just an observation
Reply #13   Feb 12, 2006 12:03 pm
I'll still stick with my Ariens.....


Frank D.

Ariens 1332DLE Pro, Exmark 52" HP ZTR, Gardian Generac generator, Shindiawa T230  Excell/Honda PW, Craftsman rototiller, Favorite IPE- My Mac + Ipod- No Windoze for me!
Replies: 5 - 13 of 13Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42