Abby's Guide to Hair Loss
Username Password
Home Discussions Reviews More Guides

Member Profile


jhart

Name John
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 7
Number of Posts 7
Number of Reviews 0
Date Joined Dec 14, 2005
Date Last Access May 16, 2007 6:05 pm
jhart's last  
Re: need advice on lawn mower - craftsman vs. honda
#1   May 16, 2007 6:03 pm
buy the one you like the feel of... I love Honda GX engines, but 15 years ago, I bought a craftsman with a 3.5 tecumseh on it and it has always started on the first pull.  It is plenty for my 5000sq ft lawn and is light and easy to get around just about anything.  Before that I had an MTD 6horse direct drive and got rid of it after 2 years, it was hard to manuver.  I think the deck will rust out before the engine gives.  I do change the oil after every season, and the air filter, too.  that's it.
Re: Generators
#2   Feb 6, 2007 7:20 pm
"Does anyone here provide a weather shelter for protection, or some sort of a doghouse when operating their machines?"

If I'm home, I run the generator from my garage, which is not physically connected to my house.  I also keep a small fan running to exhaust fumes.  This brings up a good point to make. 

Electrical extension cords, or stingers as they're called in production work, quickly build up resistance to the current flow, so it is important to use a large gauge  from the generator to the house, or worksite.  I use a 50ft. 10 gauge, and split into three 12 gauge runs to the appliances.

If I'm on remote, I transport the generator in the lined bed of an old '93 stick toyota pickup truck, grounded to the chassi.  After it is up and running I've built some sound baffles to stand up in the bed, and a baffled cover that I slide over the top.  It is protected and quiet. 

good Luck!
Re: Reverse Parts Lookup - Ariens Sno Thro Discharge Chute?
#3   Jan 26, 2006 7:45 pm
Hi Garandman:

You replied to an earlier post I made about a 79 vintage ariens 824... could you please tell me what Briggs OHV engine you put on yours?  Does it make an exact fit?

           My model is 924050  sn: 019151

Sorry for the OT post, but your email is blocked and this seemed the only way to contact you... if you'd prefer to email use: jhart3 at hotmail dot com ...

thanks
Re: ariens 824 low gear problem
#4   Jan 24, 2006 10:52 pm
Garandman

What is the model number of the Briggs OHV??  Does it line up without any mods??
ariens 824 low gear problem
#5   Jan 24, 2006 1:05 pm
Hi,

I have a '79 vintage 824 that runs well, but the first gear seems to have disappeared.  The others all work fine and it shifts very smoothly.  Any ideas?  And does it even matter?

I bought this machine used for $200 and I'm considering putting a new engine on it.  A local repair shop says it would be a waste because parts won't be available a bit down the road... Ariens is ripe for a take over, they claim.

We just had a foot of wet snow and it munched right through without any problems.  I've ordered new belts for Spring maintenance.
Hair Loss Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42