Abby's Guide to Copiers
Username Password
Home Discussions Reviews More Guides

Member Profile


davisah

Name a davis
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 2
Number of Posts 2
Number of Reviews 0
Date Joined Apr 10, 2005
Date Last Access Apr 16, 2005 2:38 pm
davisah's last  
Re: horizontal shaft Briggs, no power
#1   Apr 16, 2005 2:38 pm
Took everyone's advice. Cleaned the carb and tank, replaced carb/tank gasket, diaphram, intake gasket and the jet and jet assembly. Started and reved right up.
Thanks for the help.
horizontal shaft Briggs, no power
#2   Apr 10, 2005 6:57 pm
Could anyone suggest a fix? I have a small, horizontal shaft Briggs-Stratton engine that I'm trying to set up in a minibike for my son. The model number on the fan/starter cover suggests that it came from a vertical shaft engine at some point so I really do not know the model or power rating.

The carb sits on top of the gas tank and has 2 tubes that extend into the tank. The is one carb adjustment screw on the side of the carb. There is a device at the end of the carb that is manually pulled while cranking that appears to richen the mixture for starting. There is a cover on the carb that opens up to reveal a thin rubber diaphram with a spring underneath it. The pickup tubes that insert into the gas tank appear to be clean.

Here's the problem. The engine will start and it will idle. However, it will not rev up when the throttle is opened. Turning the adjustment screw does not remedy the problem.

Barring a solution, can anyone suggest a source for a relatively inexpensive 3.5 hp vertical shaft engine, 3/4" shaft with key? Jack's Small engines sells them new for $200.00. I'd like to get one for less$$.

Thanks in advance.
Copiers Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42