Vacuum Cleaners Discussions

Hey, I need some help picking a vacuum cleaner. Price is not really an issue, but I want to use the vacuum cleaner for these purposes: -pet hair -carpet -wood floor -tile floor I also want the vacuum to be light-weight... Can anybody suggest a good vacuum? Thanks ;) . All the best, tw23

Mike_W wrote:
Well, if the link that Anjalena has provided to the Riccar tool - I have that turbo tool - it is the same one they make for MIELE AND SEBO - and its absolutely useless in some cleaning scenarios. Oh yes it does the job well but cleaning the hairs off the thick bristles is a nonsense and time consuming, hence why I suggested the Eureka/Electrolux tool - it has thinner bristles and takes up pet hair in a jiffy - it is also a darn sight smaller and far lighter on the wrist. You might not have lifting difficulties but some people may do and this tool is far heavier than the Eureka one.

Also you may well feel that the risor visor is not needed. I however find it fantastic for cleaning the material on the front of my rear car seats where people brush their feet when getting into the car. The risor visor also makes it easier to clean the dust that sits on the padded fabric under the car seat runners. Of course it isn't always needed which is a lifestyle requirement depending on what you drive - I drive a Kia SUV and it sees a lot of action in fields, thus the car is always dirty and with pets on board it requires a brush roll as opposed to suction only floor head. Miele's car tool set only goes so far but the turbo brush is too bulky and big to get into awkward areas -the  Eureka one is smaller and more compact.

In so far as to review quoting, I'll do what I like thank you very much - after all our view points are what Anjalena are reading into - but they won't know what the vacuum is like until they try it. But I'll add in my experiences to boost my opinion and justification. Again, you may not have pain when you turn your wrist, or fight with a suction hose when it snaps back due to natural suction from a vacuum cleaner when you lift up a conventional turbo tool, but I like versatile cleaning tools that serve a purpose. The Eureka one with the risor visor prevents stress from other design issues like snapping back hoses - it is also fantastic for setting the natural flow of velour curtains or soft furnishings when the risor visor is lifted. See what I mean about versatile? If I have to continually change my hand when I'm cleaning with a hose in a downwards fashion and have to change it up, thus having to put up with hose to the side or at another angle, it is compromising - turbo tools with any design speed up cleaning time. IMHO, the Eureka design is far more efficient.

You guys are like an old married couple, sheesh. *grin*

You both have been incredibly helpful. And guess what? I've listened to both of you and then made my own decision. Vacmanuk is right in that department. Reviews themselves aren't necessarily a bad thing if you use some common sense along with them. If you realize that there will always be a percentage of reviewers who can't be pleased by anything, or got a defective unit, or had a specific situation that this particular unit didn't suit, or didn't understand exactly how it worked or how to maintain it, OR on the other side, they only had to use the unit periodically or situationally and so it always worked perfectly, etc etc. You have to account for that. And then you have the reviewers like you guys who have tested it thoroughly before making an opinion. And there are those who are professionals and know what they're doing (though, depending on the item, might be a very small number of people). The point is that you have to look at more than just the raw numbers. You have to read through the reviews, and also use your common sense to make judgement calls on the reviews. But if you've got hundreds of reviews on an item and the majority (90% or more) are still 5 out of 5 stars, for example, then you probably have a good find. So you put it on the list with your other good finds and you do more research. Why do you think I came here and posted? You guys were PART of my research, not all. Nor were the reviews all of my research.

But I've learned a lot from you guys. I hoped by coming to a vacuum-specific forum, I would get people who were knowledgeable about vacuums and I would get a feedback-based knowledge in that I could ask specific questions and get responses and then question the responses. This was different from reviews since those have static information that is coming from only one perspective and that perspective might not be specific to what I need. So I knew it would be a good learning experience and it has been, despite the drama. =)

You guys, neither of you has to be right or wrong. I think of the world as if we're all looking through our own windows that give us a view of the world. But if my view is different than yours, or yours from his, etc... it might just be because my window is on the 10th floor, or you live further down the street. If I see something different than you, it's just my perspective, ya know? You guys should be friends. You both share a love for the same thing and that should bring you together. Having to fight against each other is only a measure of pride and ego. Being someone who's always had too much pride and ego, I know. I should probably belong to the Pride and Ego forum. *laugh* There have been far too many times when I fought back because I felt a need to be right. So I'm not just saying this to you guys. I'm saying it to me too.

I think as far as the hand tool, you both just have different needs and situations. Doesn't make either of you right or wrong. Just different. But you BOTH have important knowledge about vacuums and vacuuming that is valid and important and helpful. But the in-fighting just makes you seem unprofessional and petty and tends to run your newbies, who need help and guidance, off to somewhere that they might not get such good, experienced information. So that's just something to consider.

Anyway, I'll stop zen-fu'ing you guys here with my pearls of "wisdom" and my blabbity blah blah crap. *laugh* Thank you both, again, for all the information and help! =)

Anjalena - thank you - also please post back here once you do get your new vacuum and let us know how you get on!

vacmanuk wrote:

Thanks Vac! I sure will. =) Well, I'll try to remember. I have some mental disfunctions that severely hamper my short-term memory. The only reason I've remembered to come back here is by keeping the link to this page up on my bookmark toolbar. So I'll keep it there and hope I remember. I'll probably wait a while to see how it really affects things around here... give it time to really work, ya know? But I'll try to remember to come back and let you guys know. You've been so helpful and very sweet.

And Mike hasn't said anything yet. I hope he isn't upset with me for my last message. It might have seemed kinda condescending. I didn't mean it that way. I was afraid both of you might have written back and fussed at me for it.

Oh I'm quite sure he will in time, not to worry.

Well, you guys wanted to know how the Hoover Windtunnel Air worked out for me, so I'm back. I've only used it a few times cuz it scares the crap out of my kitty.

Anyway, I'll vacuum up a pile of dirt and fur, maybe a half to a quarter Cup if you were using a measuring cup from the kitchen, and when I turn the vacuum off and move it, some of the stuff falls back out of it. I've been using it with the brushes off since I have linoleum but I actually think turning the brush on works better. This is an OLD apartment and the flooring is crap. It's not level and it's dull and stained. So I don't think the brushes are really going to hurt it much.

But what do you guys think about the stuff falling back out of it?

Anjalena wrote:
You should do fine w/the brushroll on or off.  When the brushroll is OFF, hair can get caught on the brushroll or get stuck between the brushroll and the brushroll chamber.  Debris, like kitty liittle, can sometiimes lodge itself in the chamber if there is a hidden crevice.  Debris can even sit around the edges of the bottom plate.  The brushroll can help move debris to the airflow intake, in the brushroll chamber.  If you find that you are vacuuming up alot of debris at once, you can tilt the vacuum to one side.  This will help dislodge any debris; moving it back into the air path.  This is also the same thing to do if something like a penny gets caught, but you do not want it to go through the machine; damaging something like a fan.  The object will usually shoot back out onto the floor. 

I wanted to make some comments from your previous post.  To start, you said, "Vacmanuk is right in that department. Reviews themselves aren't necessarily a bad thing if you use some common sense along with them".  Now, I said, "do not base everything of a review, unless you understand where the reviewer is coming from or know his/her experience."  Is this the topic you are contrasting?  I have to say, it looks like they are saying almost the same thing.  With your own situation, you did not base everything off a review.  You also came here and received more info.  The same as if you were walking into a vac shop.

I was making a comment to Vacmanuk, in this thread, because of something he said in another thread.  The discussion, about reviews, w/him, is in reference to a post he made here-

http://www.abbysguide.com/vacuum/discussions/64106-A-1.html

You see, one cannot make a conclusion on a vacuum cleaner he or she has never used, nor base it on only eight reviews.  All eight were not even bad reviews regarding the hose and power nozzle.  Plus, you cannot get an accurate conclusion , when reading over all of them.  Some said the cord was short, long, etc.   Eight reviews is not a good sample to conclude this particular brand and model is not very good, because there are more owners of the Riccar 1700. 

I am hoping that you have a better understanding of where I was coming from. 

BTW, did you purchase the extra attachments?  You did not mention it.

Happy Vacuuming!

Anjalena wrote:
HI Anjalena. Glad you got the Windtunnel Air though I'm sorry it scares your cat. My cat gets scared any time our "quiet" Bosch dishwasher is on - just imagine what he does when the vacuums are on! Sadly because of budget restrictions and suggestions previously pointing towards Miele being your better bet, I'm not aware of any quieter vacuums in the U.S that can offer quieter motors than Miele. There may be other brands out there; but we in the UK aren't as lucky to get the brands that you can find in the U.S like Simplicity or Riccar. Perhaps those brands and associated models are quieter, I don't know.

I haven't personally got the issue of dust falling out but do bear in mind that Hoover's dust capacity is a very small 1.5 litres in the bin or 1.31 quarts. I notice Hoover U.S plays down this fact, not able to give this detail for its buyers, and instead promises "25% extra capacity." Hoover U.S already have got into trouble with Euro-Pro and Shark over false advertising with the Windtunnel Air and Navigator vacuums (See http://tushnet.blogspot.co.uk/2012/07/apparently-false-demonstration-still.html if you are interested.)

I would agree with Mike that if dust is falling out, then it is every possibility to point towards the dust channels on the floor head. Open up the top hood via the two clips at the front and inspect the twin or single dust channels where you may well find a piece of cat litter wedged that is knocking out dust after you finish. It is easy to remove if you have the time and if you have a blunt flexible stick. If the dust is falling out by the bin at the top, then the bin just needs to be emptied thoroughly. Also ensure that the rear hose is firmly pushed into the vacuum at the back. With the Windtunnel Air being a clean air vacuum, the motor fan is completely sealed.

When it comes to unlevel floors though, I find the brush roll is better - the underside is flush and flat to cope with carpets anyway, but on the basis that fibres naturally flatten down before being activated by a brush roller, using brushes on unlevel floors should give you better performance than no brush roll at all.

Being in sales and service that model has lot of clogging issues, make sure when u turn it on dust is swirling inside bin if not it is plugged somewhere, a straight suction can is best for hard surface

vacman2 wrote:
Sorry but I don't see correlation to the previous posts for this thread. The Windunnel Air does not have a lot of clogging issues - actually probably down to the user who can't be bothered to maintain their vacuum - but then a lot of other brands and types suffer from the same problem. I rescued a fantastic vintage Hoover cylinder vacuum the other day and all that it required was a lump of dust removed from the hose. I can't believe someone threw it away.