Abby's Guide to Vacuum Cleaners
Username Password
Home Discussions Reviews More Guides

Vacuum Cleaners Discussions

Search For:
iMacDaddy


Electrolux UltraOne EL7070, Bissell BigGreen Deep Cleaning Machine

Joined: Oct 30, 2007
Points: 110

Dyson DC22
Original Message   Oct 30, 2007 9:38 am
The Dyson DC22 canister was very recently introduced in Japan. I have heard that this will make it to the US market in order to expand their canister range.

Key Features:

-Root Cyclone with Core Separation
-Dyson Digital Motor
-Stowaway Design
-Motorhead
-Pre filter rinse once every seven years

This message was modified Oct 31, 2007 by iMacDaddy
Replies: 34 - 43 of 162Next page of topicsPreviousNextNext page of topicsAllView as Outline
DysonInventsBig


Location: USA
Joined: Jul 31, 2007
Points: 1454

Re: Dyson DC22
Reply #34   Mar 10, 2008 3:58 pm

My neighbor was kind enough to translate (best as possible) the wording on this DC22 packaging (below).        DIB

 

1)      30 times better (filtering) than any cyclone vacuum.

2)      Motorhead does not slow down vs.a turbine nozzle.

3)      Updated Root with Core separator.

4)      “About” 7 years, you do not have to touch filter for 7 years.

5)      2 yr. warrantee.

 < This and other DC22 pics from a Japanese blog (while on blog, click pics to enlarge).  Here. 

This message was modified Mar 10, 2008 by DysonInventsBig



bucks03


Joined: Feb 17, 2008
Points: 76

Re: Dyson DC22
Reply #35   Mar 13, 2008 6:04 pm
I had a look at the DC22, its similar size to Dysons previous DC05.  I don't like the DC22 as it has PLASTIC for its telescopic wand not the usual alluminium  (though I never liked the aluminium) I wish Dyson would go back to the steel they used for the first model, seemed better quality.

The plastic finish  the telescope 'handle' looks like poor with some 'flash'  lines.  Its probably a good machine but I really don't like the plastic 'wand'.

Dysons bin capacity is a bit of a joke compared to the older models, my DC04 holds a full 4 litres of dirt, the DC07 hold 3 litres, DC14 hold 2 litres but later models hold a small amounts like 1 plus litres which means more emptying, not that this is difficult just annoying if machine fills whilst in middle of vacuuming.

I have kept with my DC04 and spare DC05 but I not too keen on the later models.   Why does the Shroud take up so much space in the bin in the newer models?

DysonInventsBig


Location: USA
Joined: Jul 31, 2007
Points: 1454

Re: Dyson DC22
Reply #36   Mar 13, 2008 8:18 pm
bucks03 wrote:
I had a look at the DC22, its similar size to Dysons previous DC05.  I don't like the DC22 as it has PLASTIC for its telescopic wand not the usual alluminium  (though I never liked the aluminium) I wish Dyson would go back to the steel they used for the first model, seemed better quality.

The plastic finish  the telescope 'handle' looks like poor with some 'flash'  lines.  Its probably a good machine but I really don't like the plastic 'wand'.

Dysons bin capacity is a bit of a joke compared to the older models, my DC04 holds a full 4 litres of dirt, the DC07 hold 3 litres, DC14 hold 2 litres but later models hold a small amounts like 1 plus litres which means more emptying, not that this is difficult just annoying if machine fills whilst in middle of vacuuming.

I have kept with my DC04 and spare DC05 but I not too keen on the later models.   Why does the Shroud take up so much space in the bin in the newer models?



Thank you for posting your comments on this machine.  I had no idea that plastic was used instead of aluminum on the pipe.  Do you know if the wand weight is lighter than the Stowaway’s?  A lighter weight TW wand was badly needed.  The Stowaway’s TW is heavy, bulky and the handle position directly inline with the axis line of the pipe, making turning the wand much harder than necessary (little or no leverage).

 

I own the DC05 Motorhead and think it is great! – Certainly better and easier to use than my DC21.  The pipe is aluminum with a sister pipe that is plumbed with the electrical, it is very sturdy, easy and fast to adjust to any height.  I believe if Dyson would have instead, introduced the wand and power nozzle off the DC05 versus what came on the DC11, the 11 would have been a winner here in the US.  Dyson just needs to quit over-engineering his stuff (at times).        DIB


bucks03


Joined: Feb 17, 2008
Points: 76

Re: Dyson DC22
Reply #37   Mar 14, 2008 8:26 am
HI DysonInventsBig

The plastic that is used for the DC22 TW in my opinion doesn't make the wand feel lighter, the aluminnium used on other models in very lightweight anyway.  To be honest I like a slight heavy solid feel as opposed to the light flimsy feel.

Maybe I'm being fussy but the whole 'feel' of latter Dysons just doesn't feel as good as previous machine,  I don't like the new flat out tools at all.  The Dyson DC05 when first lauched used to be dispacthed with a steel soleplate and wand

from around 2002 / 2003 Dyson started sending with a plastic soleplate and aluminium wand which just didn't feel as good as the previous ones.

Other vacuum cleaners on market are plastic but Dysons are pretty much contructing the while thing from plastic,  I wonder if one day they will just make it clip together with snap on clips, getting rid of screws all together.

I agree the DC05 Motorhead was a good machine, just a shame that there was a problem with the first design of  Motorhead which caused the wires to become exposed when the 'joint' broke but this didn't happen to all users.  Dyson modified this anyway and where good at sending out replacements.

Do you know why Dysons has changed the design on the DC24 and DC25 to have both the filters washable?  My DC04 has liftetime POSTMOTOR  filter as on DC05 which has not been changed in 5 years, it is very black with carbon dust but is still in use with no need to change.  I have noticed through that my DC04 does let some carbon dust out through the exhaust.

Thanks for reading.

CarmineD


Joined: Dec 31, 2007
Points: 5894

Re: Dyson DC22
Reply #38   Mar 14, 2008 8:33 am
bucks03 wrote:

I have kept with my DC04 and spare DC05 but I not too keen on the later models.   Why does the Shroud take up so much space in the bin in the newer models?


Surprised no dyson admirers answered.  Airblade?  Anything to say?

The largest shrouds I saw are with vacuums of years gone by.

The Lewyt and Filter Queen bagless canns of the 40's.  Tho, I doubt

they called them shrouds.  The full circumference of the vacuums

and probably half the volume of the bottom dirt container.

Carmine D.

bucks03


Joined: Feb 17, 2008
Points: 76

Re: Dyson DC22
Reply #39   Mar 14, 2008 8:40 am
CarmineD wrote:
Surprised no dyson admirers answered.  Airblade?  Anything to say?

Carmine D.

Hi

I'm surprised too.  Thought someone would have known the answer to this one.  Do you get where I am coming from, why would a vacuum cleaner manufacturer not make use of the bin capacity, the shroud is so big in Dysons and the MAX mark is rather low down compared to the first generation of UK Dyson in the late 90s.  These are 4 lites and the shroud was never that big but these where DUAL CYCLONE machine.

CarmineD


Joined: Dec 31, 2007
Points: 5894

Re: Dyson DC22
Reply #40   Mar 14, 2008 8:56 am
bucks03 wrote:
Hi

I'm surprised too.  Thought someone would have known the answer to this one.  Do you get where I am coming from, why would a vacuum cleaner manufacturer not make use of the bin capacity, the shroud is so big in Dysons and the MAX mark is rather low down compared to the first generation of UK Dyson in the late 90s.  These are 4 lites and the shroud was never that big but these where DUAL CYCLONE machine.



Hello Bucks03:

I'm with you.  BTW, Filter Queen and Lewyt

called the shrouds: "Circular shields."  Made of aluminum. 

Paper thin filters called 'cones' [because of their shape] was the

only separation of the shroud from the

dirt.

Carmine D.

mole


.

Location: earth
Joined: Sep 30, 2007
Points: 783

Re: Dyson DC22
Reply #41   Mar 14, 2008 9:14 am
IT's more than likely about air movement,Canisters with all the hoses and powerheads attached,the cfm drops [not suction but the speed of the suction].Dyson has to play with shroud location ,shroud size, the smaller diameter the the more static suction is created,sort of like sucking liquid throuh a straw,The machine has to move so much air through it before it can even think about cleaning.Hence ,why it could be called a VACUUM CLEANER.]

Yes the cyclones block after a certain time,i just wish they were easy for the owners to clean ............

MOLE

Airblade


Joined: Jul 25, 2007
Points: 180

Re: Dyson DC22
Reply #42   Mar 14, 2008 9:16 am
Sorry guys.  Wish I had an answer for you, but I'm not sure either.
bucks03


Joined: Feb 17, 2008
Points: 76

Re: Dyson DC22
Reply #43   Mar 14, 2008 9:47 am
mole wrote:
IT's more than likely about air movement,Canisters with all the hoses and powerheads attached,the cfm drops [not suction but the speed of the suction].Dyson has to play with shroud location ,shroud size, the smaller diameter the the more static suction is created,sort of like sucking liquid throuh a straw,The machine has to move so much air through it before it can even think about cleaning.Hence ,why it could be called a VACUUM CLEANER.]

Yes the cyclones block after a certain time,i just wish they were easy for the owners to clean ............

MOLE

Mole I understand what you are saying but I am also refering to the Uprights not just the cylinder machines.  Also the shrouds were smaller  on the first models which were able to produce a large amount of scution power, look at The DC07, its shroud isn't that big and it was the most pwerful Dyson in the UK even when they started putting 1200Watt motors as opposed to the 1400Watts they used to use before.  Only Dyson engineers have the answer to this answer. 

I have never encountered a problem with cyclone blocking on my DC04, DC05 or handheld DC16.  The only problem I ever have is that long hair escapes from the cyclone and when I take out the filter there is long hair on it, this isn't an issue.

Replies: 34 - 43 of 162Next page of topicsPreviousNextNext page of topicsAllView as Outline
Vacuum Cleaners Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42