tomc585

still on sale as per flyer that came today here in NY. Beware though, You get what you pay for.

Another success story here. After trying a used module (no known condition) I sprang for an ebay mega fire II ($18 shipped). Just spun it by hand a the spark was brighter then a super nova. Guess I'll be winterizing it and wait till next year. Looks like Long Island is getting an early spring. Thanks for the helpful info.

I was wondering why the service manual list the same engine, 47P, for both my ccr2000's but yet they are different.

i guess at this point it cant hurt to do a little dissecting on the spark plug wire now. will post findings.

I have 2 of these toro's that have been great. Last week I went to start one (38180)and it just wasn't feeling right. After about 10 aggressive pulls the rope came out...ugggg. Back into the garage I removed the pull cover and fix the cord. A few more pulls and I surrender to the fact that it's not going to start. Long story short..no spark. I checked all as mentioned, kill switch, spark plug, fly wheel gap etc. No luck with an unknown ign module I had in a draw and the other unit (38185) doesnt have a module I can borrow. My readings from the coil assembly are 1.1ohms and 11.4k ohms. In earlier post i read a max of just under 8k ohms for the primary. Is 11.4k out of range? I want to be sure before I purchase any parts. Thanks. Note: This flywheel has a single magnet and is very strong.