Abby's Guide to Plasma TVs
Username Password
Home Discussions Reviews More Guides

Member Profile


timadler

Name Tim Adler
Email Address private
AIM
YIM
ICQ
Gender
Age
Location Medford, MA
Personal Quote
Privileges Normal user
Rank
Points 16
Number of Posts 16
Number of Reviews 0
Date Joined Dec 6, 2005
Date Last Access Dec 24, 2009 7:45 pm
timadler's last  
MTD Snowblower service / repair manual pdf
#1   Dec 23, 2009 10:32 am
Hi all, Does anyone have access to a pdf of the technical/service manual for an MTD snowblower? I have a 5HP, model number 317E610E088 but any version will do. I have the exploded parts manual, but am looking for the service manual. Please email to tim@toadler.com or post online. Many thanks, Tim.
Re: MTD 5HP Snowblower - Auger slips under load
#2   Dec 22, 2009 11:25 am
Thanks - I should have some time this afternoon to pull it apart.
MTD 5HP Snowblower - Auger slips under load
#3   Dec 21, 2009 6:05 pm
Hi all, Looking for your valuable assistance in diagnosing this issue. I have a 5HP 2-stage MTD snow blower, and it was not working well when I took it out for the first time this season. Here is what I observed: - The auger turns only when there is no load or very light load. If I push it through more than 1 inch of snow it stops spinning. - The impeller is spinning just fine which leads me to think the auger belt is probably ok. (I did tighten the control line on the clutch thinking it was the problem before I realized that the impeller is working just fine.) - (With the engine off) If I turn the auger by hand, I find that it does not spin freely, suggesting that the shear pins are in tact. - There is some resistance when I turn by hand, but I can turn it slowly. My speculation: - Something wrong with the gear assembly? I did have to replace the gear-worm (the cog part) a couple of years ago because it got mashed by a stone. Anyway - much appreciated for any help provided. I enjoy fixing these things myself. The parts manual for my blower is listed here. Model number 317E610E088 http://manuals.mtdproducts.com/mtd/DocGetter?doc=770-97-9c.pdf Happy holidays, Tim.
Re: Tecumseh has no compression - with engine plate off has plenty of compressiomn
#4   Jan 16, 2006 9:36 am
Thanks for all the advice.

I set the clearance to the correct gap and it started right up and purrs like a kitten.

Thanks for all the advice and great website.

Tim.

Re: Tecumseh has no compression - with engine plate off has plenty of compressiomn
#5   Jan 13, 2006 10:50 pm
Thanks - I actually have the service manual in PDF form..    I guess I need very fine measurement tools as the clearance is stated as .004 and .01 inches.
Plasma TVs Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42