Abby's Guide to Plasma TVs
Username Password
Home Discussions Reviews More Guides

Member Profile


sailor77077

Name steve jones
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 20
Number of Posts 20
Number of Reviews 0
Date Joined Jan 19, 2007
Date Last Access May 29, 2007 5:10 pm
sailor77077's last  
Re: Summertime problem with Ariens 924LE
#1   May 29, 2007 5:10 pm
Jubol,

That was my first thought, but I don't have a truck & the closest dealer wants almost $75 to pick it up.  Ariens,,,,*sigh*.  Beginning to wish I had just bought the neighbor's beer this summer & used his

Summertime problem with Ariens 924LE
#2   May 29, 2007 1:46 pm
Hola,

Just some background.  I bought an Ariens 926 LE new this year.  I used the entire season and after getting the belts adjusted correctly  it did the job.  I did have some trouble with pull starting (even when warmed, it  wasn't happening) and with it riding  up on EOD piles.

Now, here's my concern.  I  have an oil leak.  It is coming from the differential on the auger.  It is a clear oil with a high viscosity.  I noticed this because I moved the machine a few weeks ago and there was an oil spot on the concrete floor.  I tried to tighten up the bolts and only got about 1/4 of one turn out of one of them.  The others were tight enough that I didn't want to put any more torque on them.  I wiped the differential clean and put a rag under it--5 days later, more oil on the casing and 10 days later, a drip.

During the season, there were no leaks and no debris  was ever picked up by the machine (I was the only user).  Now, 3 months later, the  leak.  Anyone have any ideas?  My guess is that a gasket has gone bad, but it just doesn't sound right happening in the sumertime.  I would have expected the seals to expand with the heat.

Anyway,  I'm planning that I will have to replace the seal and the lube--any advice?  This Ariens continues to frustrate me

Re: need advice on lawn mower - craftsman vs. honda
#3   Apr 29, 2007 6:30 pm
I had a craftsman 6hp non self propelled with the tecumseh engine.  It ran for 6 years and DIED.  It was blowing oil, the wheels gave out and it bagged so-so and mulched very poorly.  I replaced with a Honda HRR 216 self-propelled mulching/bagging mower with a 5.5 ohv.  I am totally amazed with the Honda.  The twin blade cut is far superior to the craftsman, the engine is so much smoother and quieter.  I did not get the smart drive system, but rather the basic 3 speed model. 

This is my second season with the mower and at this point I have been very ver happy.  When I looked for a new mower, I looked at just about everything brand out there.  I kept coming back to the Honda because it felt the most solid and they do have a good rep. 

I would not personally go back to a craftsman, but then again, my next-door neighbor had the exact same Honda model and was very unhappy with the cut quality...I have no idea why the difference.  Both were less than a year old.

I've come to the conclusion that no matter what brand you buy, you can either geat great equipment or you can get lemons.  I would pick the brand that feels best to you and go from there.

Good luck.

Re: need advice on lawn mower - craftsman vs. honda
#4   Apr 29, 2007 6:30 pm
I had a craftsman 6hp non self propelled with the tecumseh engine.  It ran for 6 years and DIED.  It was blowing oil, the wheels gave out and it bagged so-so and mulched very poorly.  I replaced with a Honda HRR 216 self-propelled mulching/bagging mower with a 5.5 ohv.  I am totally amazed with the Honda.  The twin blade cut is far superior to the craftsman, the engine is so much smoother and quieter.  I did not get the smart drive system, but rather the basic 3 speed model. 

This is my second season with the mower and at this point I have been very ver happy.  When I looked for a new mower, I looked at just about everything brand out there.  I kept coming back to the Honda because it felt the most solid and they do have a good rep. 

I would not personally go back to a craftsman, but then again, my next-door neighbor had the exact same Honda model and was very unhappy with the cut quality...I have no idea why the difference.  Both were less than a year old.

I've come to the conclusion that no matter what brand you buy, you can either geat great equipment or you can get lemons.  I would pick the brand that feels best to you and go from there.

Good luck.

Re: Really need some help--engine blowing oil
#5   Mar 3, 2007 4:50 pm
Well,

I ran the blower for about another 3 hours.  Not a single drop of oil or sign of it blowing.  Apparently, when the machin tilts back towards the controls with the engine under load, at a certain point, it will simulate an overfill condition.  Keep in mind, it was only 3-5 drops, not a large amount.  I did not "climb" any more piles & never saw the drip again.  As for the machine being overfilled, I really don't think so since I let the machine drain for about 15 mins and filled it to 26oz, checking along the way.  The oil is basically right where I filled it to. 

I'll still keep an eye on it, but, for now, I feel pretty confident that it is a simulated overfill and blowback.

Plasma TVs Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42