Abby's Guide to Plasma TVs
Username Password
Home Discussions Reviews More Guides

Member Profile


geneb

Name Gene Baker
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 2
Number of Posts 2
Number of Reviews 0
Date Joined Feb 16, 2006
Date Last Access May 18, 2006 8:49 pm
geneb's last  
Re: Where to buy a Balance cone?
#1   May 18, 2006 8:36 pm
I picked mine up at a commercial mower dealer (or you could try a place that sells home or pro lawn equipment). They frequently sell those accessories or can order it for you. You could also try searching the net for a "mower blade balancer".
I found that hanging it on a nail is not as effective.
For sharpening nothing beats a 4" to 4-1/2", 10,000 rpm right angle hand grinder. Get a coarse or medium metal grinding wheel and use a face shield (or at least safety glasses). It cuts quickly and you can take a lot off without burning the blade.
Re: What do you recommend spraying the chute and auger with?
#2   Feb 16, 2006 9:12 pm
I have been using spray furniture polish on an older Simplicity and it works pretty well. Best to do before you blow and with dry equipment. Get some cheap cans at the market, make sure they are warm and spray the whole schmere. Let dry, repeat. Several times at least. Seems to last quite a bit longer than Silicon.
Plasma TVs Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42