Abby's Guide to Plasma TVs
Username Password
Home Discussions Reviews More Guides

Member Profile


Name alan
Email Address private
Personal Quote
Privileges Normal user
Points 12
Number of Posts 12
Number of Reviews 0
Date Joined Dec 6, 2007
Date Last Access Oct 27, 2009 8:32 pm
Racerx71's last  
Toro 521 Removing Pulley from Auger ???
#1   Oct 18, 2009 5:53 pm
I need to get the Auger out to Relpace the Gear. But cant get to the 2 Bolts that hold the Pulley onto the Auger. Is there a trick ? Thanks
Re: 1987 Toro 521 Belt Adjustment ?
#2   Oct 2, 2008 9:50 am
So The Belt should not touch the Guard at all ? 
1987 Toro 521 Belt Adjustment ?
#3   Oct 1, 2008 2:09 pm
I just replaced both Belts on a toro 521. Is the finger ( Bar) that sitts to the side of the Pully off the Engine for both belts just a Guard ? Or is it supposed to keep tension on the Belt Or Belts?
Toro 1987 521. What Type of lube for the gearbox -Wormgear ?
#4   Sep 29, 2008 1:54 pm
Is the gearbox supposed to use a 90 Weight oil or grease?  I took the plug out expecting to be a 90 Weight oil and it looks lie it is grease in there ?  To my confusion I looked at a manual for the Toro Powershift and this is what it stated..

Lubrication is supplied by an SAE 90 weight extreme
pressure (EP) gear oil with an API rating of GL-5 or GL-6.
This is necessary because of the temperatures and
pressures provided by a worm helical gear arrange-
ment. Do not use Lubriplate(R) Mag 1 grease in the auger gear box

Toro Model 38510 / Serial 9001844 Relacing the Gear-Helical, is there a key that holds the gear on ?
#5   Sep 23, 2008 9:46 am

    I am trying to replace the Gear-Helical On a Toro 624 Powershift  Model 38510 / Serial 9001844 . Is it a key that holds the gear on the Shaft? How do you remove it?  

Thanks, Alan 

Plasma TVs Guide   •   Discussions  Reviews   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2019 All rights reserved.
Site by Take 42