Abby's Guide to Plasma TVs
Username Password
Home Discussions Reviews More Guides

Member Profile


Pitt

Name Mike Pittenger
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 6
Number of Posts 6
Number of Reviews 0
Date Joined Jan 15, 2011
Date Last Access Jan 22, 2011 1:29 pm
Pitt's last  
Re: Ariens snowblower - drive belt burns up
#1   Jan 16, 2011 4:36 pm
I appreciate the advice from everyone - I think mine is going to the shop.  I tried pulling the axle, but the hex bolt won't back out of the gear, even after the nut is off.  Tried pulling the The drive plate still only rotates about a half inch in either direction.
Re: Ariens snowblower - drive belt burns up
#2   Jan 16, 2011 11:42 am
I've removed the pulley, pulled the set screws from the hub and can't remove the hub.  It still turns about a 1/16 of a revolution in either direction.  Will continue with WD40 and try removing the drive plate.
Re: Ariens snowblower - drive belt burns up
#3   Jan 15, 2011 11:21 pm
Thanks all, for the advice.

Model - 932032

I'll try loosening up the plate in the AM
Re: Ariens snowblower - drive belt burns up
#4   Jan 15, 2011 4:50 pm
Drive belt is correct - the auger/assembly has been removed.  The sheave? (the wheel the belt wraps around that connects to the drive plate) for the drive will move "a little" but won't turn.
Re: Ariens snowblower - drive belt burns up
#5   Jan 15, 2011 3:58 pm
Thanks.  Bottom spindle?  Is this the connection from the friction plate/drive plate to the pulley?
Plasma TVs Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42