Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides

Member Profile


bozman

Name Mike
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 4
Number of Posts 4
Number of Reviews 0
Date Joined Feb 7, 2015
Date Last Access Feb 9, 2015 8:05 am
bozman's last  
Re: Ariens drive does not engage
#1   Feb 9, 2015 7:53 am
FYI Hydro 36 has been returned. After 1/2 hour of work the drive belt dropped and trashed the fan on the hydro trans. I brought it back up to the shop for repair. The dealer was not impressed w/ Ariens quality these days. Said he has seen lots of issues due to factory mess ups. Mine was a missing bolt on a major bracket supporting the hydro. He was very cooperative an let me swap out for a new Honda 1332 w/ tracks. I am going to log some time on that today as it is still snowing. Really appreciative of the dealer!
Re: Ariens drive does not engage
#2   Feb 8, 2015 7:20 am
I cracked open the machine to get a better look at that drive plate and free it up but... After a closer look the right side wheel bearing was gone and the right side lower handle bar was cracked. Lots of snow this season has killed my 1336. I've owned it for 15 years and had bought it used. I think it is a '95. So I bought a new rig. Hydro 36. Snowing out now and will be all weekend so I was either going to hire a plow or shovel. NOT! I'll fix the old 1 up this summer and sell it. After the fix up it will still have lots of life. Thanks for the reply guys.
Re: Ariens drive does not engage
#3   Feb 7, 2015 8:13 am
I did some more searching here on abbysguide and came across this thread [1] which describes my problem but in reverse. Drive does not disengage mine does not engage. Solution there was to 'oil' the shaft the drive plate slides on. What is that shaft called? I'm wondering what is the proper oil to lube that with? Should I clean it 1st? With what should I clean it w/ ? Thanks. [1] http://www.abbysguide.com/ope/discussions/66559-0-1.html
Ariens drive does not engage
#4   Feb 7, 2015 7:40 am
Ariens 1336 Model: 924107 I believe that my friction plate is adjusted correctly as when it work it works well in all forward and reverse gears. Problem is that after I initially start the machine I can not engage any gears. It seems as if the activating shaft is not moving the drive plate into contact w/ the friction wheel. After the initial startup and I'm guessing things warm up the drive plate will move to engage w/ the friction wheel. I'm not clear on what i should look at next. Should I clean and lube something? Help?
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42