Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Honda gear box repair video

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
jrtrebor


Location: Michigan - 3 hours north of Chicago on the lake
Joined: Feb 10, 2010
Points: 539

Honda gear box repair video
Original Message   Feb 23, 2012 6:29 pm
The subject of greasing Honda 2 stage auger shafts has been discussed / debated here a couple of times.
The unfortunate results of un-greased shafts.
Wouldn't want to be paying that bill.
Video
Replies: 10 - 11 of 11Next page of topicsPreviousAllView as Outline
FrankMA


Location: Merrimack Valley/Northeastern Mass
Joined: Jul 1, 2010
Points: 587

Re: Honda gear box repair video
Reply #10   Feb 28, 2012 12:29 pm
I had my HS624WA for 10 years and never had any issues with the shafts getting frozen like is shown in that video. I  used to live at the bottom of a hill that got salted pretty good as it was just before an intersection. What I used to do to counter the effects of the heavily salted EOD was to do that area first. I would go straight to the EOD driveway area from the back of my property and go at it til it was done. I would then clear all the other areas of my property where it was all virgin snow free of any salt. This allowed the bucket area to be "flushed" clean of all that salt and prevent rust and corrosion from forming. I guess it worked because whenever I threw a shear pin (which was not too often), the augers would spin freely. That said, it is still a good idea to grease or oil that area every once in a while to minimize the chances of the two surfaces rusting together

Toro Wheel Horse 522xi GT, Honda HS928TA, Honda HS621AS, Honda HS520A, Toro CCR3000 (work in progress), Honda HS624WA (sold 08/23/2010), Stihl BR550 Backpack Blower, Stihl MS250, McCulloch MS1635, Honda EM6500SX Generator
aa335


Joined: Nov 29, 2008
Points: 2434

Re: Honda gear box repair video
Reply #11   Feb 28, 2012 12:41 pm
I do the same as you FrankMA, start out with the EOD first and flush out the snowblower with clean snow afterwards.  It's good for the snowblower and plus you don't drag all that salty/sandy muck into the garage.  My HS1132 is going on 4 years now, I take out the shear bolts and spin the auger before storage and after coming out storage just to make sure it's spinning freely.  My machine is light residential use so that is sufficient to detect any problems.
Replies: 10 - 11 of 11Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42