Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Engine not running smooth, stalling

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
beastieboy


Joined: Jan 30, 2011
Points: 1

Engine not running smooth, stalling
Original Message   Jan 30, 2011 2:34 pm
I have a Toro 1028 OXE that I purchased two years ago. Admittedly I've not done the year end routine of maintenance and now it seems to have come back to bite me. The engine has been running very rough this year so today I drained the fuel and added new premium 93 octane fuel, changed the spark plug and for good measure changed the oil. Still the same problem, engine will not run smooth and actually is stalling now after a few minutes at idle. Normally I would just have it in for service but with the amount and frequency of snowfall this year, I can't be without it for a week. Any suggestions for what I should try next would be appreciated.
Replies: 1 - 4 of 4View as Thread
Replies: 1 - 4 of 4View as Thread
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42