Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Ariens 1028 Just repaired and tuned, is not throwing snow as far as it should? Anyone can help

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Martin7


Joined: Jan 27, 2011
Points: 2

Ariens 1028 Just repaired and tuned, is not throwing snow as far as it should? Anyone can help
Original Message   Jan 27, 2011 10:17 am
Goor morning, I have an Ariens 1028 snowblower purchased used several years ago and since some seasons it seems not to throw snow as far as it should.  I recently noticed my neighbour with a smaller one having much more succes clearing his driveway! The snow only falls few feet away. Can anyone tell me how I can fix this? I have an electronic version of the manual for it, but no mention of this problem in the troubleshooting section.  Thank you for your help.  Martin
This message was modified Jan 27, 2011 by Martin7
Replies: 2 - 4 of 4Next page of topicsPreviousAllView as Outline
Martin7


Joined: Jan 27, 2011
Points: 2

Re: Ariens 1028 Just repaired and tuned, is not throwing snow as far as it should? Anyone can help
Reply #2   Jan 27, 2011 1:04 pm
Thank you.

      I had never heard about the impeller kit before. I sure will give it a try. I found a gap of about a 1\4 inch. Hopefully that will give it a boost! 

relics


Joined: Jan 16, 2011
Points: 41

Re: Ariens 1028 Just repaired and tuned, is not throwing snow as far as it should? Anyone can help
Reply #3   Jan 27, 2011 3:49 pm
I would think the belt is slipping.But they did not reduce the engine rpm when it had work done to it did they?  A motor down on compression will also throw less distance to
tkrotchko


Location: Maryland
Joined: Feb 9, 2010
Points: 143

Re: Ariens 1028 Just repaired and tuned, is not throwing snow as far as it should? Anyone can help
Reply #4   Jan 27, 2011 4:34 pm
I was looking at the distance on a Honda 2-stage blower and there is actually a lot of distance between the impeller and the wall next to it, so closing that gap is one way to increase throwing distance, but if it is just a few years old and it suddenly is throwing a shorter distance, then I'd think it would be preferable to find out why the issue started. Now if its always been like that, then I guess it makes sense to improve the design with the impeller kit.
Replies: 2 - 4 of 4Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42