Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

For every new engine I ever purchase, whether in a new car or a lawnmower I change the oil after just a few hours of use.  I learned to do this because a new  engine wears in and creates small metal particles that cause excess wear if they are not removed from the engine, and even in new cars with oil filters the filter is limited in how small the particles it can trap.  In the case of my New Honda GX 270 engine that powers my Honda Snowblower, I ran the machine for about 2 hours, then drained and refilled the engine with 100% synthetic oil.  When the oil was visible in the drain pan it was grey in color from the large quantity of metal wear particles suspended in the oil.   I will probably wait another 4 to 6 hours of operation before doing another oil change.   Considering that the expensive new engine only requires a little more than 1 quart of oil, and it has no oil filter, it seems a prudent investment to add these very early oil changes to the maintenance regimen of a new engine.   Incidentally, Honda suggests the first change after 20 hours.  Based on the evidence of the metal in the oil, I would suggest that is far too long to wait for that initial oil change.  

I'm curious how others feel about this.

mikiewest wrote:
The HONDA owners manual tells the proper weight and API classification for the oil, How does using that weight and classification conflict with the owners manual if the motor oil is synthetic instead of the cheaper dino oil ?  Where in the Owners Manual does it prohibit using synthetic oil ?  So this is yet Another Bogus Statement  (BS) by mikiwest ? 

New_Yorker wrote:

What is wrong with you? I have been on this site for a few months while shopping for a snow blower. You have some good knowledge on these machines, but your attitude and ignorance make for some ruined forums. There are people like me who come to this site for knowledge not $#%* talking. If your going to talk $#%* all the time do it on facebook or something. Don't give New Yorkers a bad name. Change the oil whenever you want. It's your machine.

MN_Runner wrote:
Nothing I did or suggest is against anything in the owners manual.  If you imagine that to be the case provide the OM entry, and I will respond.

MN_Runner wrote:
Why ? Because You Would NEVER Want To Buy a Machine From someone who followed the Owners manual and even exceeded its minimum requirements ?  I would only sell something used that I needed to dispose of to someone wise enough to appreciate it.  So you are correct, You would not buy a car or snowblower from me, of that I am certain.

Hi Chxbeachva,

You are right on.  Keep us true!

mikiewest wrote:

ANOTHER BS from mikiwest !   Did I say the engine on my machine was kept running all the time in the arctic or was I making a point about the advantages of 100% synthetic oil to anyone wise enough to use it ?

mikiwest, I may have to just ignore you if the best attempts at criticism of me are what you've said here.    The word Inane comes to mind whenever I read one of these comments.

New_Yorker,

Just curious, what kind of work do you do?  Are you a physics professor? Or maybe a Southern Baptist Minister?

Chxbeachva wrote:

My responses to S#*+& Talk is to explain myself clearly, and "In KInd" if you bothered to read the BS you'd already know that.  Some simpleton attempting to say my advice is wrong or at odds with the manufacturers instructions when it obviously is not should expect such a reply.  Even the Bible says one reaps what they sow.  Read post #1 and tell me where I sow'd the replys I got ! The forums aren't ruined by me, just the idea that any lame-o advice is the same as the facts.  My advice is good advice, so try asking yourself why that causes others to criticize it.  I was not the one telling people to ignore the owners manual and grease something that has no need of grease, I just pointed out the truth.  That was when the whole thing went downhill.  That was who started talking S#*%@ Not Me.  And they keep coming back to it, not me, I tried to move on.  Proof - Read Post #1 again !

New_Yorker wrote:

That's where you took what I wrote all wrong. This isn't your first post. Your advice is great advise, and I have read just about every post. You were smug on some of them and now there are people here who just want revenge. But, you feed into it. I just got my blower recently and I need to change my oil so I want to read what you, mike, mn, and all the other more experienced people have to say. I had in my head just to have the dealer pick the machine up every season. It would be super expensive but whatever, you pay for convinience. I have taken the covers off the belts and am pretty confident I can do the work myself. So thank you all for your knowledgeable posts and who cares when you change your oil or weither someone comments on a boat in the background. This is for fun and if we didn't love toys so much we would have bought the cheapest shovel in the store regardless what size driveway we have. Thanks again. Happy New Year.

Chxbeachva

Changing oil is not that hard - you can get nice how to DIY videos from YouTube.  Don't worry too much about conventional or synthetic oil.  Just make sure you have enough oil in the engine and check the oil level before useage.  Keep up the good work.