Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Shear bolts on Ariens 824

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
calogero


Joined: Jan 23, 2005
Points: 1

Shear bolts on Ariens 824
Original Message   Jan 23, 2005 7:01 pm
Hi guys,even though I had my snowblower for 2 years I never had to change a shear bolt until now, It seem that part of the bolt is stuck and hard as I try I cant get it out.I brought a metal drill bit and see if I can bore out,unless you gentlemen have a better suggestion,thank you,Calogero.
Replies: 3 - 3 of 3Next page of topicsPreviousAllView as Outline
terrapin24h


The more I learn the less i know

Location: Rochester NY, USA
Joined: Dec 18, 2003
Points: 628

Re: Shear bolts on Ariens 824
Reply #3   Jan 24, 2005 11:14 am
I keep mine religously greased, so I just pounded mine out with the new shear pin.  The anxillary benefit of doing that is that the old pin as it comes out helps keep the auger centered as the new one goes in.  BUT, i had a very very clean shear.  Be sure you don't over tighten the new pin, or it won't shear right the next time.

--chris
2001 Homelite VacAttack Blower
2001 6hp Toro PPace 22" mower
2001 Ariens 824LE
2002 6hp 2400 PSI Excell Powerwasher
2004 18hp Craftsman 27375 42" mower
2004 42cc Craftsman 18" chainsaw
Replies: 3 - 3 of 3Next page of topicsPreviousAllView as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42