I have a 2005 926LE (926101). Some time ago, not this year (probably last year or further back), I found a hair pin in my trailer while loading/unloading the unit. I am not sure when it was. This past week, I was doing some service and had the unit in the service position and had the wheels off with the cover off the bottom. I noticed some iron dust at the pinion shaft inside the cover and the slight imprint of the hairpin in the orange paint on the side. Now I know where the pin goes. I looked on line and found the anti-rotation kit and the recommendation here to others to install the kit. I just order the kit from the dealer. I have the hairpin reinstalled. I guess I wore the holes some since it was used without the pin in there. The unit does work fine though. I don't think there was any major damage. I just want to do the upgrade.
Question is, how to install the kit: I see a bolt sticking out of the side of the machine that the loop of the hairpin is around to stop the rotation. There is some movement because it doesn't touch the pin all the time. I suppose the plate for the kit goes on the bolt, the pin is held stationary by the plate and the nut goes on the bolt right? I won't have the kit until next week, I am just making sure I know how to install it before it comes. Kit part number is #52603400.
Thanks
GP
