Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > John Deere 1130 SE

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
Clay


Location: Wis
Joined: Dec 3, 2008
Points: 111

John Deere 1130 SE
Original Message   Jan 7, 2009 1:07 pm
I did a search and found a few references to this machine but no answers.  Any one have one of these?  15.5 snow max engine, heated hand grips, 30" wide.  I can't find a listing for auger diameter or impeller diameter.  I called John Deere and the guy that was suppose to be the snow thrower expert didn't know either. 

What is the Easy Steer drive system?  The literature says: 

  • Easy Steer® drive system giving continuous power to both wheels and auto speed adjustment
  • Is it similar to the Ariens auto differential? 

    I've heard that the units are built by B&S which translates to Simplicity.  They do have cast iron gear cases like the Simplicity.  The chute control is different than the simplicity and so is the turning method so they are not exactly the same.  I'm trying to compare the Simplicity L1530E to the JD 1130SE.  Any help would be appreciated.

    Rick

    Replies: 178 - 187 of 333Next page of topicsPreviousNextNext page of topicsAllView as Outline
    Swoods


    I love all power equipment from lawn mowers to snow blowers. My favorite pieces of equipment are 2 cycle Lawn Boys.

    Location: Elburn, IL
    Joined: Nov 21, 2009
    Points: 65

    Re: John Deere 1130 SE
    Reply #178   Dec 18, 2009 9:49 pm
    Looks great!  Very innovative.  Guess I have to get myself some plastic :)  By the way, I just got another LawnBoy Mower.  That makes 4.  It's not running, but I figure it will be a good Christmas project when I have family over. 

    Sean Woods
    Swoods


    I love all power equipment from lawn mowers to snow blowers. My favorite pieces of equipment are 2 cycle Lawn Boys.

    Location: Elburn, IL
    Joined: Nov 21, 2009
    Points: 65

    Re: John Deere 1130 SE
    Reply #179   Dec 19, 2009 2:13 pm
    Well,  my drivetrain is starting to slip.  A few days ago I lost 1st gear.  Today, I lost both reverses and 1st gear.  It wouldn't work when I pulled the cable either.  I could smell rubber burning as the friction disc slipped.  It started working a little while later after letting it sit.  I brought it to the local John Deere store here in Elburn.  I have not put the water seal parts in yet for around the belts.  Hopefully the John Deere dealer will do this for me.  Before Briggs told him they wouldn't have it done when it wasn't slipping.  Well, it's slipping now.  My dealer also mentioned the clutch update.  The new 1130SE he had on the showroom floor did have the seal parts on it from the factory.  
    This message was modified Dec 19, 2009 by Swoods


    Sean Woods
    borat


    Joined: Nov 10, 2007
    Points: 2692

    Re: John Deere 1130 SE
    Reply #180   Dec 19, 2009 5:33 pm
    Catt: That should protect most of the chute. The sides don't see the abuse that the back does. I used one of the plastic sheets that kids use to slide down hills. I think they're called Krazy Karpets around here. Picked it up at Canadian Tire. I managed to put an entire insert into my chute by forming the piece inside the chute and clamping it in there with a piece of 2x4 in order to draw the lines to cut off the excess. Once I had the shape inscribed on the plastic, I trimmed it accordingly. After that, I took the plastic and bent it over the same piece of 2x4 holding it there with clamps. Then I heated the corners with a torch to get them pliable and take the shape of the 2x4. Once cooled down, it retained the shape and fit nicely into the chute. I didn't drill any holes in the chute. I used the holes that were already there. For the deflector, I drilled and riveted a piece of stainless steel to the underside. I thought that the deflector might take more of a hammering than inside the chute hence the stainless steel. My insert has held up nicely now for two seasons. It has a bit of scuffing in around the centre portion but far from wearing through. I'd say it's probably good for ten to fifteen years.
    Catt


    Location: Minnesota
    Joined: Oct 16, 2009
    Points: 196

    Re: John Deere 1130 SE
    Reply #181   Dec 19, 2009 7:00 pm
    Swoods, I sure hope this gets resolved for you.  I'm pretty confident that if these updates aren't on the machine it will slip.  They should be doing a 100% recall.
    Catt


    Location: Minnesota
    Joined: Oct 16, 2009
    Points: 196

    Re: John Deere 1130 SE
    Reply #182   Dec 19, 2009 7:05 pm
    borat, I think this will work pretty well, but I'm going to keep an eye on the exposed sides.  If I see problems, I will be going to rev B and get more plastic in the chute.  I did look for crazy carpet, but I could only find it online.  I found orange and blue... no black.  
    borat


    Joined: Nov 10, 2007
    Points: 2692

    Re: John Deere 1130 SE
    Reply #183   Dec 19, 2009 9:42 pm
    Catt wrote:
    borat, I think this will work pretty well, but I'm going to keep an eye on the exposed sides.  If I see problems, I will be going to rev B and get more plastic in the chute.  I did look for crazy carpet, but I could only find it online.  I found orange and blue... no black.  


    It's probably marketed under different names as well. Slippery slider, Magic Carpet etc. or something like that. This time of year, they should be common.
    Swoods


    I love all power equipment from lawn mowers to snow blowers. My favorite pieces of equipment are 2 cycle Lawn Boys.

    Location: Elburn, IL
    Joined: Nov 21, 2009
    Points: 65

    Re: John Deere 1130 SE
    Reply #184   Dec 20, 2009 11:55 am
    Borat,  are you talking about plastic saucers?  Go to fullsize image

    I can't find Magic Carpet, Crazy Carpet, or Slippery Slider, or anything else like that.  
    This message was modified Dec 20, 2009 by Swoods


    Sean Woods
    Swoods


    I love all power equipment from lawn mowers to snow blowers. My favorite pieces of equipment are 2 cycle Lawn Boys.

    Location: Elburn, IL
    Joined: Nov 21, 2009
    Points: 65

    Re: John Deere 1130 SE
    Reply #185   Dec 20, 2009 1:34 pm
    This might be a good option for shoot liner plastic.  It is green.  Or, a green storage tote could probably work too.


    http://www.homedepot.com/h_d1/N-5yc1vZ1xr5/R-100278536/h_d2/ProductDisplay?langId=-1&storeId=10051&catalogId=10053
    This message was modified Dec 20, 2009 by Swoods


    Sean Woods
    Catt


    Location: Minnesota
    Joined: Oct 16, 2009
    Points: 196

    Re: John Deere 1130 SE
    Reply #186   Dec 20, 2009 1:42 pm
    Here is an update to the plastic chute liner.  The upper deflector plastic has a problem with only one bolt.  Snow hits the leading edge of the plastic and causes it to bend out and then it catches a lot of snow causing it to bend even more. It looks like a mess of snow coming out of the chute.  So I replaced it with metal similar to what borat used and still used the one bolt.  I only had aluminum available but it's pretty thick.  This should make it more durable.  I'm still using plastic on the lower section of the chute.  It looks like it will work, but we had a very small amount of snowfall today (1"-2") so I'll need to try it again at a later date when we get a larger amount.





    I think this is similar to the crazy carpet sled borat was referring to.
     
    http://www.canadiandesignresource.ca/officialgallery/toys/hello-world/
    This message was modified Dec 21, 2009 by Catt
    Catt


    Location: Minnesota
    Joined: Oct 16, 2009
    Points: 196

    Re: John Deere 1130 SE
    Reply #187   Dec 20, 2009 4:00 pm
    Here is a picture of my 1985 828 Allis Chalmers that I was using today.  It was made by Simplicity and is essentially their Pro series.  I use it at my office building and it still works fantastic.  My 2009 Deere 1130SE is also made by Simplicity.  Maybe I should just be buying Simplicity blowers.

    Replies: 178 - 187 of 333Next page of topicsPreviousNextNext page of topicsAllView as Outline
    Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
    AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
    Copyright 1998-2024 AbbysGuide.com. All rights reserved.
    Site by Take 42