Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

I have been looking at toro 826, ariens 927dlx, simplcity 9528 and JD 1130 [which I understand is a simplcity in JD green]. I have a 250ft driveway mostly one car width. I know there is some differences in sizes , but they are close to my budget of $2000 canadian taxes in. Will the 826 handle the heavy wet snow as easy as the larger Simplicity and JD models. It is hard to get a straight answer out the salesman,so I will ask questions on here.  Cast iron gearboxes vs aluminum, does it matter?  The chute rotation gears in the toro are plastic , in the ariens they are plastic and steel  vs. both steel gears in the simplicity and JD . Is that a concern for the future? What are your thoughts on these models longevity? Help me pick the right !st snowblower.

There are some other differences between a Simplicity 9528 and the machines you've listed.

9528 has a 4 blade impeller, easy turn, one had operation capability, snow max engine, bigger wheels, and weighs 255 lbs. The 26" Ariens is 228 lbs. That's 27 lbs. lighter. The Toro is even lighter at 222 lbs. The difference in weight tells me that we're not just looking at gizmos, there are obviously structural differences between the the classes of machines. I don't have all the machines available for me to measure shaft thickness, chassis steel thickness nor the thickness of impeller and auger components. However, just by comparing weights, I would venture to guess that some of the above features are probably not the same specs as the heavier machines.

For what they are, the machines you've listed are not bad machines. I just don't think they'd be up to the task as well as the larger frame machines under very difficult circumstances. I will say that the prices aren't bad either. Other than the Toro.

ope please....dont even try comparing toro to simplicity.Until now toro offered the tecumseh L-head engine on the machines except for the 1128OXE.And even on the 09 models,all of their machines have the same size tire,not the case with simp.Toro loves plastic.And save your breath on how it's hi tech NASA grade plastic.Plastic will always be plastic.If it does crack ...you're in for a big replacement bill.Steel doesnt crack.It might ding or rust but thats easy to touch up.Also Simp uses cast iron gear case on their Large frame and Pro machines.And I have spoken to numerous ope dealers.They laugh at Toro using left ,right power steering.It makes the machine more susceptible to breakdown and its not necessary.Toro is a good yuppie machine lol.

Well of course the Toro will be the lightest of the group. Did you see the amount of plastic used on one? Theres a lot. If you factor the plastic, aluminum gearcase, and lack of any traction system that could equal anywhere from 10-15 lbs. That is not necessairly a good thing, since in some cases you want a heavier machine, but Toros are aimed at a different consumer. They are marketed as the "sports car" of snow throwers so more for residential or light commercial work. That is the reason they are evenly balanced on the wheels, to make them more maneuverable. Once again, just because its aimed for "light" comercial work does not mean it is cheap. Just a different design.

When refering to the Simplicity, is that the L1428E? The second model in the large-frame throwers?

Now back on topic:

Granville, considering the machines you have been thinking about I would either go for the Toro or the Simplicity. I would stay away from Ariens. Also I wouldn't go for John Deere even though it is a bit cheaper. John Deere partnership is very interesting and I think Simplicity cheap out on some internal compounents to sell them for less. Especially since JD wants to make some money too. I see them sold at Lowes, with other MTDs.

The only problem is the Toro is a totally different machine compared to the Simplicity L1428E. I think the Simplicity would out throw the Toro.

mikiewest wrote:
Well I guess we all have our own opinions. And I am a yuppie for purchasing one. ;-)

Plastic is plastic, but without it lots of stuff wouldn't exist. Toro offers five years on all their "plastic" HDPE. Oh, and plastic doesn't rust and cause snow sticking.

But that doesn't matter anymore since I recommended the Simplicity anyways for the OP conditions.

Like I said,steel will rust but it doesnt take much time and effort to touch it up and u wont have a sticking problem...The snowblowers that r 30+ yrs old r steel not plastic my friend.

I find that using the the term "sports car" of snow throwers amusing. What kind of marketing ploy is that? Who, in their right mind would swallow that line? It's funny how some people can be herded in a certain direction simply by suggestion. If a sales person was to lay that line on me, I'd laugh at him. It's a snow thrower. A machine designed to throw snow so you can get to your "sports car". I'm certain there are enough people out there willing to delude themselves into thinking they're having more fun throwing snow than the poor fellow next door with the Ariens or Craftsman or whatever. The Toro guy, in his own mind, may be having more fun, but the other guys, in most cases, will have their driveways cleared just as soon as the Toro guy and some even sooner. But hey! The Toro guy will burn some donuts in the driveway for us when he's done!

Personally, I think Toro machines are fine snow throwers. Plastic and all. I just find that they're over priced and the dealerships that I'm exposed to tend to be arrogant. That is the part I find hardest to accept. Arrogance for what? There are numerous machines out there just as good and some better for less money. What's there to be arrogant about. Even Honda dealerships don't have attitude as bad as the local Toro dealer.

By the way, the 9528 is the same as the 1428 which is the first size large frame Simplicity with the cast iron gear case. It's more like the "tractor" of snow throwers.....

when u buy the sports car of snowblowers, do u get a latte also??lol....

does anybody know for sure if the JD 1130 is a true simplicity or does it have some murray mixed in?

I think Snowmann said the JD had a Murray drive system back in 2008. Don't know if that has changed for this year, but the bucket and chute are simplicity design.

Snowmann wrote:
http://www.abbysguide.com/ope/discussions/30234-0-1.html

granville wrote:
The "Large" Simplicity platform and it's derivatives (JD 1130 is one of them) have significant Murray based DNA (frame, traction driveline, handlebars, belt drives, auger and traction clutch systems). The blower head is the only legacy Simplicity assembly. You can compare part's manuals online to confirm this. The "Large" platform Simplicity was the first compromise made with their snow products after Briggs acquired them in 2005. There are a few folks on this forum that are happy with them, but the fact is they are not of the same grade as competitive premium units.