Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Hello,

I have a driveway 40ft X 25ft + 60ft sidewalk, and get quite a lot of snow.

I wanted to get the 24" deluxe (for space) but found it hard to maneuver with both wheels locked, not bad with one wheel unlocked.

I was thinking of moving up to the 27" deluxe (larger than I need) which has the trigger for wheel locking for an extra $130.

My local dealer suggests I upgrade to the 24 DLE  with the automatic traction control, light, handwarmer for $ 464 more than the 24 deluxe.

For a little more I can get a Toro 828 XLE which has the power steering (also larger than I need).

Craftman has a 24" 249cc B+S power steeriing $ 1,000 - same features as the 24" DLE , but not sure about quality.

The locan dealer also suggest Simplicity 9hp 24" ST 2718 ?? for $ 1200. Lighter than the Ariens (not sure if it has traction control.

Can someone please advise which one is best bang for buck.

Snowman, you are the Ariens pro, is the 24 DLE worth that much more than the 24 deluxe or the 27 deluxe? Will Ariens have a sale

In Sept. or October that the Dealers will pass on to customers? I read that some Ariens had problems with the Friction Disk and Baffle plates

has to be installed, and chute control cable freezing. Have these issues been fixed in the 2009 units?

Thanks you all.

gsnow

aa335 wrote:
:-) ... (grrrrr)

"That's what she said." 

Sorry, couldn't resist.

I'll add another shameless plug for the HS928.  It has a powerful engine, 9HP.  It can never be too powerful, it has throttle control.  Bucket size is 28 inch.  Axle is solid from left to right wheel, no differential to benefit from or to worry about breaking.  Chute rotation is a worm gear and crank, and deflection cable actuated.  It is all manual, no electrics.    Again, no benefit, no worries about failures.  The chute design is what Ariens and Simplicity tries to emulate, allows tight stream for accurate placement of snow discharge.  So far, it is one of two brands of snowblower that has hydrostatic transmission.  Both of these brands start with the letter H.

Negatives? 
Price.  Get one now because the price will go up next year.  Guaranteed.  Even used ones command high price and hard to come by.
Price.  Everyone hates their high price.  Except the manufacturer.
Price.  Everyone thinks you're nuts for paying that much to a company that also makes cars, motorcycles, weed wackers, and lawnmowers.
Features.  It doesn't have convenience features of Toro, or as much black space age polymer.  *wink*
Involvement.  Yes,  you do have to work it.  It ain't going to do it all by itself.  Except...I ain't going to there.. unless you want to pony up a few more Benjamins or put up your car as collateral.

Positive? 
The design has been locked down the last 5 years.  You won't feel cheated when next year model comes with something better.  You don't feel stupid that you didn't buy last year's model because they built it cheaper this year.
It already comes with the most powerful, advanced, and proven reliable engines from the manufacturer.
You won't see the same snowblower with a different branding or paint.  In other words, you can't get it painted in green and yellow.  However, you won't need to pay extra for green paint and outsourcing.
Clean design.  Tidy cable management.
No fancy acronyms or confusing product segments.

SnowRemover wrote:
RuhiA wrote:
Hate to come late to the party, but just in case someone is reading this forum I'd like to restate that the OP is looking at the Toro 828XLE which does NOT have shearpins. At least twice a year my neighbors will be at the bottom of their driveway (where the plow seems to drop off large boulders that have come from another town) and back in the garage to get another shearpin. They stock up on them now.

SnowRemover wrote:
I'm late to the party too and still hung over from the last party so bear with me.

I'm unclear what you want to say.  Are you advocating looking for snowblowers with or without shear pins?

aa335 wrote:
Did you not read  SNOWREMOVER  signature,

hirschallan wrote:
Now it makes perfect sense.