Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > CCR 2000 Mikuni carb rebuild

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions
Search For:
hrweeks


Joined: Jan 26, 2009
Points: 1
CCR 2000 Mikuni carb rebuild
Original Message   Jan 26, 2009 11:55 pm
I was cleaning the carb on my CCR and I bumbled the unbuild and now I have a part that I don't know where it goes.<BR>it is a small square piston with a pointy end. I don't know where it is suppose to go as I reassemble the carb.<BR>Any help? I have pics but i don't know how to upload them here...
This message was modified Jan 26, 2009 by hrweeks
Replies: 1 - 3 of 3View as Outline
seabird


Joined: Nov 10, 2005
Points: 34
Re: CCR 2000 Mikuni carb rebuild
Reply #1   Jan 27, 2009 5:23 am
this diagram may help
hirschallan


If it aint broke don't fix it !!


Location: Northern Hills of NY
Joined: Aug 25, 2005
Points: 327
Re: CCR 2000 Mikuni carb rebuild
Reply #2   Jan 27, 2009 10:58 am
look at #29 in diagram
borat


Joined: Nov 10, 2007
Points: 2692
Re: CCR 2000 Mikuni carb rebuild
Reply #3   Jan 27, 2009 2:05 pm
That  is probably your float needle.  It's what allows fuel into the float bowl and is controlled by a lever connect to the floats.  Look for the fuel line into the carb and you will see where the float needle goes.  Pointed end in.  You will have to remove the float to seat the float needle.
Replies: 1 - 3 of 3View as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42