Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Ariens Impeller

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
jaks51703


Joined: Dec 14, 2007
Points: 4

Ariens Impeller
Original Message   Dec 19, 2007 2:05 pm
Just wondering what the advantage was to having a 4 blade impeller vs a 3 blade... All the new Ariens model have 3 blade from the smallest to the largest (1336)...Some of last years models have the 4 and even 6 blade. How does this impact the performance of the machine??? DO they spin it faster with the 3 blades, or is the impeller redesigned so that the 3 blade works just as well as the 4 blade??
Replies: 1 - 6 of 6View as Outline
jubol


Location: Dover, De
Joined: Oct 3, 2003
Points: 1558

Re: Ariens Impeller
Reply #1   Dec 19, 2007 2:20 pm
I think Ariens is reinventing the wheel again!!

                                                                Fred

            

Husqvarna STE927(11.5HP) snowblower,  MTD Pro Series 18/42 Lawnmower, MTD 6.5 HP  Self Prop Lawn Mower,  Weedeater 1500 Blower, Web Gensis  2000 
Moderator Denis


Location: CAN
Joined:
Points: 638

Re: Ariens Impeller
Reply #2   Dec 19, 2007 4:13 pm
Good one Fred,

Well in my opinion, they tested 4 blades vs 3 blades and they probaly seen no difference but if you build 1000 unit a year and save 1000 piece of steel 2x4 inches, welding supply, time to assembling, companys saves a lot of money too. That's one story....


MountainMan


Overpowered is Usually Adequate


Location: Connecticut
Joined: Feb 19, 2003
Points: 1564

Re: Ariens Impeller
Reply #3   Dec 19, 2007 9:44 pm
I  know they have gone back and forth over the years with number of impeller blades.

IIRC, there was really no differnce, since as long as the impeller is being fed the maximum amount of snow it can handle, it will move it at the same rate.

Ariens 1128PRO- Honda Generator_ Husky 480-257 Jonsered 2050Turbo- Shindiawa T2500 SCAG Mower -little wonder blower-Sears track blower-Coleman Generator- Bombadier ATV-Stihl HS-45 Etc-Etc-Etc
nibbler


Joined: Mar 5, 2004
Points: 751

Re: Ariens Impeller
Reply #4   Dec 23, 2007 10:25 am
If the only variable is the number of blades then the 3 blade design should move a slight amount more snow since the volume taken up by the fourth blade is now filled with snow. The other argument is that each lump of snow in the impeller is smaller with a 4 blade design and therefore might go further or require a slightly smaller blade. Either way the engineering department will have tested this out three ways from Sunday and know exactly what the characteristics of each design is.

I have a hunch the performance difference is somewhere between none and negligible and that it comes down to manufacturing costs versus sales claims (  I.E. " now with the new 3/4 blade impeller for added performance" ).
borat


Joined: Nov 10, 2007
Points: 2692

Re: Ariens Impeller
Reply #5   Dec 23, 2007 10:48 am
Has anyone ever measured the thickness of the plate that the blades are welded to?  As Denis pointed out, there are production/material cost saving by using the three blade system vs. the four .  Unless, the four blade system provides better load distribution and stiffness to the mounting plate thus minimizing possible flexing and deflection.  The three blade system might require a thicker back plate.  Even if thicker plate was required, I cannot see that being more expensive than additional material for the fourth blade, plus cutting and welding.  Yeah, I'm with you guys....Can't see the reasons for the difference either.   
Snowmann


Joined: Dec 3, 2003
Points: 494

Re: Ariens Impeller
Reply #6   Dec 23, 2007 2:02 pm
It will obviously depend on geometry and flow characteristics, but all things being equal there is little difference.  If anything, 3 blades may be slightly better. Some folks have opinions on slush versus fluffy snow and the effect of more blades, but most of this is baseless. Unless you have 2 identical units to compare, with different impellers, it is speculation.

Most of the 4 and even 6 blade impeller stuff is driven by customer perception. More blades = better to some customers. Exaggerate that slightly, say 25 blades, and you can see that is kind of silly. There is obviously a threshold where more blades does not help. 3 is it (for typical 10" to 14" snow impellers).

PK
Replies: 1 - 6 of 6View as Outline
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42