Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Just an observation
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions |
|
spottedpony
Joined: Aug 23, 2004
Points: 301
![]()
|
 |
Just an observation
Original Message Feb 1, 2006 11:39 am |
|
I find it interesting that as highly rated as the Ariens blowers seem to be rated, that i see so many posts about them having problems. or breaking down. Ive paid attention for quite some time now & it seems always 30% to 40% of the posts are referencing a problem of some type with the Ariens & it seems to mainly be newer blowers. This brings to mind several questions, first and formost, if they are the quality they're reputation seems to hold, why are there so many problems with them? Is it only a matter of cutting quality to stay in a competitive price range while keeping profits as high as possible, or is it just poor quality control? Even if this brand is the majority of blowers owned by people, 30+% seems to be an excessive amount of blowers having varied problems.Its understandable that after some years of use, parts wear out and repairs are necessare but since it seems to be mainly newer models with low hours on them having problems, it makes me wonder how much the quality has been reduced over comparable models say 10 years old, & they are relying soley on reputation for sales in todays market?
|
EGreen
Location: Amherst (Buffalo), New York
Joined: Nov 4, 2005
Points: 57
![]()
|
 |
Re: Just an observation
Reply #12 Feb 8, 2006 2:33 pm |
|
I read a lot of posts that blame poor setup for a lot of problems. This makes me wonder how much setup is involved. When I bought my Toro a few years agoI had to buy it online because I couldn't find any locally due to a big storm that cleaned everyone out. When it was delivered i had to assemble the handle,tractiong control linkage,chute control rod,and headlight. Then it was just a matter of checking the tires and skid height,and filling the engine with gas & oil. I'm hardly a qualified mechanic,so it seems that anyone that can read should be able to setup a snowblower. Problems such as belts,etc.would seem to be the manufacturer's problem,not the dealer's; unless it specifically relates to setup for that particular brand. I know that they are covered in the manual,but not under setup,so it falls back on the manufacturer. Just my $02 The manual details what needs to be done in setup, it states that a run in of the engine, to check to make sure it wont fail, adjust the carb, for smooth idle etc, for the blower itself its states to check pulleys/belts/friction wheel/friction disc/augars/implaller/drive speed/engagment of clutches and check for proper chute rotation and tension of the lines/belts. Mine actually came with a seperate pamphlet for the chute control assembly. Toro might do it differantly but it seems a majority of problems come from home depot and don't get rectified, instead just replaced with a new blower or it goes to a dealer and is charged for inproper setup, while as with a dealer they stand behind their product and run it through the paces to make sure it will last and wont have to come back for awhile.
|
|
|
