Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides
Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Ariens Part Changes

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:
zslnk


Joined: Mar 15, 2005
Points: 8

Ariens Part Changes
Original Message   Mar 21, 2005 7:35 pm
Hello,

I'm working to fix up my old ST1163, 924071 SN 003233. I ordered axle bearings from a dealer (05417700), they don't fit the bearing retainers and the dealer says that they are the corect ones. The new ones are sealed on both sides (old ones were sealed on one side) and they allowed the bearing retainer plates to sit flush on the sides of the blower. The new ones hold the bearing retainer out from the blower. Does anyone know if you want to use the new bearings if you have to get updated bearing retainers or did I just get the wrong bearings. On the Ariens parts radar there is superseaded data that makes it looks this way but not for my blower, just for a slightly different model because the bearings for mine are not listed.

Thanks,

Craig

Replies: 1 - 2 of 2View as Thread
Replies: 1 - 2 of 2View as Thread
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42