Abby's Guide to Hair Loss
Username Password
Home Discussions Reviews More Guides

Member Profile


editfred

Name Fred Levine
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 2
Number of Posts 2
Number of Reviews 0
Date Joined Dec 12, 2007
Date Last Access Dec 14, 2007 12:37 pm
editfred's last  
Re: Ariens 8 hp throttle/governor problem
#1   Dec 13, 2007 9:40 am
Yes, it's a Tecumseh engine. It sounds like it's revving too high, although when I disconnect the governor linkage and push the throttle by hand to increase the revs, sparks and soot start flying out of the exhaust, so I'm not sure where I am with revs. The throttle cable moves fine, as does the throttle plate when the engine is off. WHen the engine is on,  the throttle pushes against the governor linkage, but doesn't move it. I'll try to describe the governor attachment--there's a clamp that holds a bracket onto a shaft that goes into the crankcase. That bracket moves back and forth when the engine is off, but is difficult to move when the engine is running. Then, there's an arm attached to the bracket with two holes where the linkage connects to the throttle. That arm is held onto the bracket (attached to the shaft) by a screw. The screw is tight, so the arm does not swivel in relation to the crankcase shaft bracket. I'm not sure if it's supposed to be loose or tight--although there doesn't seem to be any way to leave it loose without the screw and nut being shaken loose. I hope that clear.
Ariens 8 hp throttle/governor problem
#2   Dec 12, 2007 4:20 pm
I have a pretty old Ariens 924 that I'm trying to keep running. I'm fed up paying the local repair shop to keep it running, so I'm trying to get it working myself. The latest problem is that the throttle doesn't move because the governor linkage is keeping it frozen in place. When the engine is shut off, the governor shaft moves properly, but once the engine is running, it takes so much force to push it that the throttle doesn't move. I'm new to small engine repair, but if anyone has any suggestions they would be greatly appreciated. Also, if anyone can recommend a good manual for servicing this thing, please let me know. I have a Haynes manual, which is pretty useless.

Thanks in advance.
Hair Loss Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42