Abby's Guide to Credit Cards
Username Password
Home Discussions Reviews More Guides

Member Profile


daverly95

Name David Tam
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 1
Number of Posts 1
Number of Reviews 0
Date Joined Feb 13, 2010
Date Last Access Feb 13, 2010 9:09 pm
daverly95's last  
Re: Troy Bilt Storm 5524
#1   Feb 13, 2010 9:01 pm
My Troy Bilt Storm 5524 also had a problem where the wheels locked up.  I had to take off the wheels to get the hex shaft out of the unit.  The gear assembly had significant rust on the bearings that roll against the hex shaft.  I sprayed PB Blaster to remove the rust, then applied Moly grease to all the gears and reassembled everything.  Needless to say this took awhile.  Also I found that the bolts that hold the wheels in place can not be too tight.  If the bolts are screwed in too tight, the wheels also lock up. 

Another thing I find a little annoying is the metal tubing that holds the gear shift linkage in the locked position when you use it.  The gear shift linkage is designed with a hinge so you can fold the handles down for storage.  While you're using the machine and shifting it from forward to reverse a few times, the metal tubing comes loose which prevents you from changing speeds.  I'm not sure if there is a fix from Troybilt for this, but I use some electrical tape to hold it in place.  It works.
Credit Cards Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42