Abby's Guide to Copiers
Username Password
Home Discussions Reviews More Guides

Member Profile


FreeltonDave

Name Dave Wilson
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 4
Number of Posts 4
Number of Reviews 0
Date Joined Feb 6, 2008
Date Last Access Feb 7, 2008 5:18 pm
FreeltonDave's last  
Re: Problem with tecumseh 8hp that don't start...
#1   Feb 7, 2008 4:05 pm
I'm in agreement with newjerseybt  "Make sure flywheel key is not broken which will knock your timing way off."

Dave Wilson

Re: Well it was an Adventure
#2   Feb 7, 2008 3:56 pm
Actually Kenora is just this (yes I'm from around Toronto too) side of halfway across Canada! I used to drive back and forth to Winnipeg (for supplies) every week from a camp on Shoal lake just outside of Kenora right on the Ont/Man border. Used to have fun telling everyone I drove from one side of Canada to the other and back EVERY WEEK!

Dave Wilson

Re: Repower question
#3   Feb 7, 2008 3:47 pm
Johnny: I had the same problem with my chute. The easiest way I found so far is man's best friend...Duct tape! It's shiny and slippery and is applied really fast.

I did however take the chute off, use a wire brush on a drill to buff it up, and applied a new coat of spray paint to get better adhesion. Worked like a champ.

Have you tossed the H70 yet? Mine is an H80 and the carbs may be the same. I'll find out. If you are interested in selling the carb (just in case, touch wood) let me know. I'm just down in the TO area. Mine just popped the intake valve spring retainer. Looks like I'm shovelling until a new part arrives...approx 1 month.

Dave Wilson

Copiers Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42