Abby's Guide to Vacuum Cleaners
Username Password
Home Discussions Reviews More Guides
Abby’s Guide > Vacuum Cleaners > Discussions > Looking for a lightweight

Vacuum Cleaners Discussions

Search For:
jkbmmv


Location: Dickinson, ND
Joined: Oct 11, 2008
Points: 28

Looking for a lightweight
Original Message   Nov 30, 2011 4:08 am
Ignoring my other post about canisters, I am looking for a Christmas gift for Mom.. She is getting older now and is having trouble in the strength department... She still lugs her Kirby g3 around the house, but is wanting something for the downstairs bedrooms... After listening to her describe what she hates about all of the vacuums I have brought to her here is what I need to find:

A bypass upright with the motor in the head and not the neck, no on board attachments and has the ability to go under beds..

Does such an animal exist? I'd give her my oreck that I have but the brush roll is so soft compared to the others that it really won't separate the nap and clean the floors...

Thanks in advanced!

Joshua
Replies: 1 - 10 of 17NextNext page of topicsAllView as Outline
Venson


Joined: Jul 23, 2007
Points: 1900

Re: Looking for a lightweight
Reply #1   Nov 30, 2011 6:49 am
Sebos are the only brand that fit that description but can be a little expensive. 

If you hadn't said "by-pass" I'd have suggested the direct-air Oreck or the Hoover Platinum bagged vac.  The Oreck XL Pilot and Oreck Insight did well as does the The Hoover Platinum bagged which can be found teamed with a portable vac for above the floor stuff plus bare floors.  I've used the Hoover upright and portable and they do nicely.  Even better they run cheaper in price than the same kind of set up from Oreck.

How often does your mother vacuum and does she have a lot of traffic?  If she doesn't have a lot of traffic your Oreck might be just fine for her. You might even inquire at an Oreck dealer to learn if there's a firmer brushroll that will fit your machine.

Venson

jkbmmv


Location: Dickinson, ND
Joined: Oct 11, 2008
Points: 28

Re: Looking for a lightweight
Reply #2   Nov 30, 2011 10:47 am
I was thinking about that after I posted and maybe the bypass isn't a requirement as much as it would be to get weight off the body/neck so there isn't much weight on the arm. I was looking at the hoover platinum bagged vac and really liked what I was reading.

She really doesn't have a lot of traffic, just a lot of lint and what not since the laundry facilities are down where the bedrooms are.
This message was modified Nov 30, 2011 by jkbmmv


Joshua
jkbmmv


Location: Dickinson, ND
Joined: Oct 11, 2008
Points: 28

Re: Looking for a lightweight
Reply #3   Nov 30, 2011 1:00 pm
Are the riccar/simplicity lightweights (freedom and what have you) worth their beans in anything?

Joshua
Venson


Joined: Jul 23, 2007
Points: 1900

Re: Looking for a lightweight
Reply #4   Nov 30, 2011 6:23 pm
jkbmmv wrote:
Are the riccar/simplicity lightweights (freedom and what have you) worth their beans in anything?

.

The Riccar Supralites and Simplicity Freedom get great ratings and user reviews. The only disadvantage, for what they are, is the noise level.  How bothersome that is depends upon the individual user.  Other than that, Riccar/Simplicity machines are sold by independent vac stores meaning price may be negotiable allowing them to be competitive as the MSRP is a little up there for a lightweight meant only to handle flooring. 

Note the Hoover Platinum bagged vac weighs in at about thirteen pounds and the Riccar and Simplicity at about nine.

Venson

vacmanuk


Location: Scotland UK
Joined: May 31, 2009
Points: 1162

Re: Looking for a lightweight
Reply #5   Dec 1, 2011 7:13 pm
Dont forget Venson though, SEBO may be expensive but the alternative is the SEBO based Windsor Sensor uprights, usually cheaper as they are based on the older X1 Auto (the one we had for 15 years.) Comes with tools and a wand, but you don't have to use it.
Venson


Joined: Jul 23, 2007
Points: 1900

Re: Looking for a lightweight
Reply #6   Dec 1, 2011 10:46 pm
vacmanuk wrote:
Dont forget Venson though, SEBO may be expensive but the alternative is the SEBO based Windsor Sensor uprights, usually cheaper as they are based on the older X1 Auto (the one we had for 15 years.) Comes with tools and a wand, but you don't have to use it.


Point well taken vacmanuk, but I think cost is an essential issue in buying especially with with the problems we're having here. 

When I had the money -- and steady work -- I bought my Mieles despite, even then, their meaning a disproportunate stretch of the budget.  However, if I had to replace a vacuum now there's no way per budget I could swing a like purchase without seriously messing up money needed for other basic but very necessary things.  The person asking has stated he's pulling three jobs.  I couldn't in good conscience recommend other than what appears conveniently affordable.   That's why I didn't even bother to mention Miele when he spoke of the "command control" he'd like to have on a canister vac.  Miele is best in show but can definitely be lived without if you have to.

Being perfectly honest, I see a decent vacuum as an essential for any household. Yet, in mine, if a replacement machine is called for I'll be buying a good refurb or used item. 

Best,

Venson

jkbmmv


Location: Dickinson, ND
Joined: Oct 11, 2008
Points: 28

Re: Looking for a lightweight
Reply #7   Dec 2, 2011 10:35 pm
Don't let the 3 jobs fool you. I don't have the patience to do anything for too long of a time. They are all part time jobs throughout the week to just give a bit of variety. If I had just one full time job I'd go nuts doing the same thing over and over.

Now, as far as what I was looking for with this, I had 3 Windsor XP12 machines and she didn't like them because there was too much weight on the handle when she used them. Same with my Simplicity 6 series. She had a few wal-mart specials that she bought and didn't like them because they had everything on the neck/bodies and they were heavy. When I brought the supralite she actually seemed intrigued.. I think our only complaint about the machine _is_ the noise... Why would they make the machines so noisy? I mean since they are direct air machines the exhaust goes through the bag so why can't the motors be a bit more muffled? If I remember correctly, I had a post a few years ago about this very issue with commercial orecks... I wonder if a bit of dynamat on the underside of the housing would help? I guess its just a concern with her house because the noise actually echos... Oh well, I have until the middle of January to return the machine if its not tolerable.

As far as the Miele machines, I thought the s7 was the *only* actually made-in-house machine? Not that I wouldn't mind having an s7 upright if I had more carpets, but still? I did actually look at Miele first before I went with the Riccar... The prices really weren't much different, but I am wondering if this is gonna be like the whole Dyson thing, a European vacuum sold in America.. Now to my other post for the remainder of this post...

Joshua
vacmanuk


Location: Scotland UK
Joined: May 31, 2009
Points: 1162

Re: Looking for a lightweight
Reply #8   Dec 4, 2011 1:00 pm
jkbmmv wrote:
Don't let the 3 jobs fool you. I don't have the patience to do anything for too long of a time. They are all part time jobs throughout the week to just give a bit of variety. If I had just one full time job I'd go nuts doing the same thing over and over.

Now, as far as what I was looking for with this, I had 3 Windsor XP12 machines and she didn't like them because there was too much weight on the handle when she used them. Same with my Simplicity 6 series. She had a few wal-mart specials that she bought and didn't like them because they had everything on the neck/bodies and they were heavy. When I brought the supralite she actually seemed intrigued.. I think our only complaint about the machine _is_ the noise... Why would they make the machines so noisy? I mean since they are direct air machines the exhaust goes through the bag so why can't the motors be a bit more muffled? If I remember correctly, I had a post a few years ago about this very issue with commercial orecks... I wonder if a bit of dynamat on the underside of the housing would help? I guess its just a concern with her house because the noise actually echos... Oh well, I have until the middle of January to return the machine if its not tolerable.

As far as the Miele machines, I thought the s7 was the *only* actually made-in-house machine? Not that I wouldn't mind having an s7 upright if I had more carpets, but still? I did actually look at Miele first before I went with the Riccar... The prices really weren't much different, but I am wondering if this is gonna be like the whole Dyson thing, a European vacuum sold in America.. Now to my other post for the remainder of this post...

Well if your mom doesn't like the XP12, she's going to hate the Miele S7. Too bulky, too big and its quite a chore turning the handle from left to right. Early models in the UK suffered from handles breaking off.
jkbmmv


Location: Dickinson, ND
Joined: Oct 11, 2008
Points: 28

Re: Looking for a lightweight
Reply #9   Dec 7, 2011 2:28 am
Lol, no, I wanted the s7. I thought they were impressive machines when they came out.. But then again, I liked the xp12... :/

Joshua
vacmanuk


Location: Scotland UK
Joined: May 31, 2009
Points: 1162

Re: Looking for a lightweight
Reply #10   Dec 7, 2011 1:27 pm
What about the Sebo Felix or its commercial twin, the Windsor Axxcess?

Replies: 1 - 10 of 17NextNext page of topicsAllView as Outline
Vacuum Cleaners Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42