Abby's Guide to Plasma TVs
Username Password
Home Discussions Reviews More Guides

Member Profile


searl

Name pagosaguy
Email Address private
AIM
YIM
ICQ
Gender Male
Age
Location Pagosa Springs, CO
Personal Quote
Privileges Normal user
Rank
Points 1
Number of Posts 1
Number of Reviews 0
Date Joined Mar 11, 2006
Date Last Access Mar 11, 2006 3:18 pm
searl's last  
Re: Worm Gear and Shear Pins
#1   Mar 11, 2006 3:18 pm
Debbi wrote:

I appreciate all your input.  I'm not hitting any obstacles other than the occasional piece of ice.  Living in Michigan's snowbelt, we are always plowing snow 12" or more deep.  The augers seem to turn freely, but I'll get the grease to them just to be sure.

The original shear  pins looked to be made of a bronze type material.  Now when I buy the MTD brand pins required in the snow thrower schematic, the pins seem to be made of galvanized.  Good point about how tight the pins are, that's something I'll have to check.

I've considered going to a machine shop and having a gear custom made out of steel.  I'm not sure if this would damage the thrower or not.



Hi Debbi,

Just a heads up. I noted the same change in color or material you saw. I own a Yard Man (MTD) Model 763 snowthower. I used to be an MTD power equipment tech way back when.... I puchased some MTD shear bolts from the local dealer where I purchased the snowthower. After going out and sucking up some gravel, I noted the auger had jammed. After freeing the auger, I also noted the auger was no longer turning, although the the shear bolts had not sheared. This probably means the gearbox is shot. I will be contacting the dealer Monday to see if they will cover this problem, as they sold me the shear bolts as MTD replacement parts.

These new bolts have the 2 notches on the shaft and appear to be galvanized or zinc treated and do not appear to be the "Bronze" color of the original bolts and some 6 or 8 replacement bolts I have used in the past. This change happened about Jan. or Feb. 05. The old bronze bolts would shear with no problem. The new bolts did not shear, indicating  an incorrect strength for the application.

The bolt head is stamped with the letters "BI" as in "Bravo"  "Indicate".

I did a little research and found a picture of bolts that look similar to these new bolts at Outdoor Distributers, an after market OPE parts distributer:

http://search.cartserver.com/search/search.cgi?cartid=a-8671&category=MTD_Parts&maxhits=20&keywords=710-0890a&go=GO%21

Note the STENS - 780233 shear bolts, listed as an OEM replacement for MTD-710-0890A which are the bolts called for on my unit.

I will find out if the local dealer used these bolts as an MTD replacement and let you know what happened. I would also like to know if any one else has noted this problem on an MTD or Yradman blower with replaced shear bolts.

Thanks 

Plasma TVs Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42