Abby's Guide to Plasma TVs
Username Password
Home Discussions Reviews More Guides

Member Profile


RTR1

Name Duane
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 1
Number of Posts 1
Number of Reviews 0
Date Joined Jan 17, 2017
Date Last Access Apr 9, 2017 2:50 pm
RTR1's last  
Re: Toro CCR 2000, no spark from plug wire
#1   Jan 17, 2017 8:35 pm
Thank you all for your input to this subject.  I realize this is an old discussion, but the following is offered with the hope that it will help at least one other person.

My machine:  CCR2000, Model # 38180, S/N 39_ _ _ _ _, 1993 vintage.  Prices for parts varied by supplier, but here is a typical quote.  Magneto Coil $213, Magneto Module $124.

I was experiencing the same issue (no spark) and found several good pointers in the responses herein.  My experience:

I had checked the magneto coil's secondary and primary winding resistances with a digital auto ranging meter.  Primary (low voltage) measured a 1.5 ohms.  Secondary (high voltage) winding measured many mega ohms.  Following the advice in one of the submissions above, I checked the connection in the spark plug boot and found it was corroded.  Cut the end off, made a new connection and measured 10k ohms.  With a smile I hoped it would fire up.  Not so lucky, still no spark!

With good resistance readings, the coil appeared to be healthy, which left he "magneto module," as it is referenced by Toro.  I didn't know a way to diagnose the module, so I ordered a universal module from Oregon (#33-053) for $14.71.  Installed the module and runs like a champ.  Storm to arrive tomorrow so just in time.

Thank you all.
Plasma TVs Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42