Abby's Guide to Plasma TVs
Username Password
Home Discussions Reviews More Guides

Member Profile


NoCo

Name Larry Bruns
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 2
Number of Posts 2
Number of Reviews 0
Date Joined Aug 27, 2005
Date Last Access Aug 31, 2005 12:26 am
NoCo's last  
Re: B&S 6.0HP Quantum engine runs badly with gray smoke
#1   Aug 30, 2005 1:38 am
Thanks for the advice, SpottedPony!  I'll check out the oil.

BTW - drying out the gassy filter in front of the fan all night did help a lot, but nowhere near enough.  So I bought a new one.

-Larry
B&S 6.0HP Quantum engine runs badly with gray smoke
#2   Aug 27, 2005 9:59 pm
While typing this request for advice, I decided to try one more thing and found the problem!

PROBLEM: When starting, it sounds great for about 2-3 seconds and then slows way down and coughs out black smoke.  Occasionally there is a metallic ping.  The power output is too anemic to mow anything but the lightest grass growth.

The mower is nearly new (bought last year) and had operated perfectly until my son last week tilted it backwards a lot to handle 11 days of grass growth.

The paper manual and the online guides at briggsandstratton.com say it's OK to tilt the mower backwards, but not forward.  However, I suspect the tank was full at the time (due to a telltale "bathtub ring" left by gasoline on the body of the mower just below and surrounding the base of the engine) and so I think a lot of gas poured out while he was mowing and somehow got into the air filter, even though the filter is forward of the tank top.

SOLUTION:  Took out the air filter (one screw holds a hinged cover over the filter) and started it and it runs fine!

The air filter reeked of gas even after one week (I had naively assumed any gas would have evaporated by now).  As it's running, if I slap the filter back in place, it slows down again after a 2 second delay.  (That's how long it takes to run out of oxygen, I guess).

Finished lawn with no filter, crossing my fingers all the while - even though that makes it harder to hold the safety bar.  :-)  :-).

ACTION:
 1) Try to dry the filter out by suspending it in front of a floor fan all night.
 2) If this doesn't work I'll buy a new one - hopefully no more than $5.

HOPE THIS HELPS SOMEONE ELSE!
Larry, mowing my Mile Hi lawn in Fort Collins, CO.
Plasma TVs Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42