I bought my Toro 1128 OXE in Feb 10...I had an old Agway 8hp with a snow king engine for 17 years and needed more power and throwing distance. I have about 1100 feet of asphalt driveway thats 20 feet wide and a 60' x 40' turn around as well, the entire drive is sloping and some areas are very tight as to where you can put the snow due to trees and other obstructions.
1128 operated as advertised, I can blow 20" of snow at least 45 feet and its as easy as talking a slow walk. In the two large snow storms that we've had (2010) back to back and about 40" on the ground this machine did not bog down once nor falter in anyway!! The trigger track steering is terrific and the machine in easier to operate than my old 8 hp machine that only had a 24" wide shroud. It literally is very easy either to gradually turn the machine in a slow arch or a zero turn with the trigger (s) locking either wheel you wish (which for a machine this size is needed) and the one hand operation is great with the automatic locking of the impellers.
The throw distance is impressive!! If you ever seen a skiing area blow man-made snow onto the slopes it's a smaller version of that; no need to blow snow twice to get it where you want and no big, "plow drifts" at the edges of your driveway. The 1128 never bogged down once, even at the plow wall at the end of the drive from the public equiptment doing the main street. It was really nice.
The chute is really impressive, made like an inverted funnel, no clogs and after a short time I was putting the snow where I wanted; with one hand operation of the chute at first it acts like a charged fire hose line...all over the place!! But thats due to operator error; within a short time I was placing the snow exactly where I wanted it.
I paid $1909.03 (with 6% Pa sales tax) for my machine and it was worth every penny with the two back to back storms....it takes me about 1 1/2 hours to do my entire drive and parking area; with the old machine it took me 3 hours for the turn around area alone and I had to hire a plow driver to finish the job!!.
I would reccommend this machine to anyone that does not want to blow snow twice!!
Sam M.
I posted earlier here that I swapped my Toro 1128 for an Ariens 1332. I thought offer some comparisons here..
I bought my Toro 1128 OXE from the local dealer in December of 2006. It was the first walk-behind blower I'd ever owned. I have a double-wide paved driveway about 75' long with turnaround and we get well over 100" of snow yearly, so I didn't want to get caught short. It served me well, but the only regret I had was wishing it was a tad wider. Recently, an Ariens 1332 LE (924128) came up on Craigslist. The seller wanted to trade for a slightly smaller machine. The Ariens was two years older but with very little use, so we agreed to an even trade. I've not had much use with the Ariens yet, but have gone over it very carefully, so I'm posting the differences I've found thus far.
The Toro was at the time, and still is, their top-of-the-line offering. They used to build 12- and 1332's, I believe, but this 1128 is now their biggest. The Ariens, on the other hand, I believe is the biggest machine available at the big box stores (or was--recent trip to HD found 6 hp to be the biggest Ariens in stock); bigger and more deluxe machines (1336) are available at Ariens dealers.
Both machines feature Tecumseh power, but the 13hp has a counterbalancer, hence the Ariens is a bit smoother. Both machines start easily: five pokes of the primer, full choke, half throttle, give the cord a limp-wrist half pull and they're running (heated garage). I've never used the 120v electric starter, but it's nice to know it's there.
The first (and biggest) difference that jumps out is in maneuverability. The Toro has the trigger steering, which not only aids steering the machine during usage, but makes it a snap to wheel around when the engine's shut off. As it's a well-balanced machine, you just pull both triggers, tip back and it's no more difficult to move around on hard surfaces than a wheelbarrow. The Ariens has a solid axle with no steering assist, and weighs about 50 lbs more. The only option you have is to pull the pin on the right wheel which then makes it free-wheeling. In order to do this, you must get the wheel off the ground (I use the "service position"). This is a heavy machine, and I have my concerns about maneuvering during usage. Time will tell. Ariens does offer machines with trigger steering and/or a full differential, which I understand works very well.
The Toro makes use of plastic (or perhaps "polymer")components--including the chute and "Quickstick" control. This is disconcerting at first, and seems cheaper than the Ariens which is all steel construction. However, I never had a problem with the plastic, and the chute never clogged--not one time. The included chute cleaning device on the Ariens says that I can expect some clogging.
As previously mentioned, the Toro has the "Quickstick" chute control. This is a very good design, but takes getting used to. A previous post made reference to the "loose fire hose" effect, and that's not totally inaccurate. Once you get used to it, though, it is slick. The Ariens has the 2.5 crank which works well with a separate deflection control. The newer Ariens have a sliding chute control lever which I understand has been somewhat problematic.
The Ariens seems to be a bit heavier built than the Toro. The bottom panel bolts are 9/16" head on the Ariens, while the Toro has 7/16" or even smaller if memory serves me correctly. The Ariens bottom panel is once-piece; Toro is two, making the Ariens more easily accessible from underneath. The Ariens owner's manual is much more comprehensive than the Toro--I performed virtually all regular maintenance on the Ariens that could have been done by the dealer--and armed only with the owner's manual.
The Ariens has a 16" auger while the Toro has a 14". The Ariens has zerk fittings and shear-bolts; the Toro has neither, as they claim their gearbox will withstand anything (I had no problems during my time with it).
The Toro has the pivoting scraper blade which the Ariens lacks. However, the Ariens scraper blade is easily reversible/replaceable, which the Toro's isn't. I never did quite figure out the advantage to the pivoting blade--it sort of appeared to me to be engineering overkill. My paved driveway does have some cracks and lumps, so we'll see if the Ariens fetches up on them. I do like the idea of easy scraper blade replacement.
The Ariens has handwarmers; the Toro does not. It also has larger tires, but as it's a larger machine it needs them.
Well, that's it for now. I am of course comparing a non-current Ariens to a current Toro, and I've tried to make my comments reflect that.
UPDATE: I've used the Ariens now on two light storms now (both about 3"). It is harder to maneuver than the Toro, expected. The 13 hp Tecumseh, which I'm told has a counterbalancer (thanks, Snowmann!) is indeed smoother than the 11hp, and really makes a nice muffled exhaust bark when it comes into heavier snow. The Ariens is a bit more forward-weighted than the Toro, which was almost centered on the wheels. This makes the Ariens a little less likely to ride up, but doesn't seem to affect traction. Snow blowing distance seems to be about the same--both machines excel. The 2.5 chute crank on the Ariens works well enough that I don't really miss the slick Quickstick. When clearing out the mailbox I broke a shearpin with the Ariens, which I never did with the Toro in two and a half years. The extra 4" width of the Ariens doesn't seem like much, but it makes a world of difference. The handwarmers are very nice.
Both good machines. Toro more maneuverable, Ariens heavier and a real beast. I like 'em both, but I recommend that any machine of this size should have some sort of steering assist.
