Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides

Member Profile


hubert

Name hubert
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 3
Number of Posts 3
Number of Reviews 0
Date Joined Dec 1, 2006
Date Last Access Dec 25, 2006 2:35 pm
hubert's last  
Re: honda hs35 snowthrower - how to remove control knobs
#1   Dec 25, 2006 2:35 pm
No need to reply. I solved my problem. Found out how to remove 2 of the 3 knobs, enabling me to bend the plastic panel enough to get at the choke shaft and reconnect it.  Thanks anyway.
honda hs35 snowthrower - how to remove control knobs
#2   Dec 13, 2006 12:46 pm

My aged Honda HS35 Snow Blower runs like a dream and usually started at the first pull. However, the sort of u-shaped wire at the bottom of the Choke Knob shaft somehow came loose from wherever it is supposed to connect to. The wire is still connected to the Choke Knob shaft at the other end. I suspect it will be quite obvious where the wire has to be reconnected once I get the plastic control panel off. The problem is, I haven’t been able to get the panel off because can’t quite figure out how to get the Fuel Valve knob and the Engine Switch knob off. I tried prying to some extent but don’t want to try too hard because I might damage something. I somehow got the Choke knob off last year but I don’t remember how I did it. Can anyone tell me how these knobs come off? Also, as long as I am asking, will it really be obvious where the sort of u-shaped wire gets connected? Does anyone know of a diagram existing somewhere that shows it? Thank you very much for your help.

how to remove knobs - honda hs35
#3   Dec 1, 2006 6:08 pm

My aged Honda HS35 Snow Blower runs like a dream and usually started at the first pull. However, the sort of u-shaped wire at the bottom of the Choke Knob shaft somehow came loose from wherever it is supposed to connect to. The wire is still connected to the Choke Knob shaft at the other end. I suspect it will be quite obvious where the wire has to be reconnected once I get the plastic control panel off. The problem is, I haven’t been able to get the panel off because can’t quite figure out how to get the Fuel Valve knob and the Engine Switch knob off. I tried prying to some extent but don’t want to try too hard because I might damage something. I somehow got the Choke knob off last year but I don’t remember how I did it. Can anyone tell me how these knobs come off? Also, as long as I am asking, will it really be obvious where the sort of u-shaped wire gets connected? Does anyone know of a diagram existing somewhere that shows it? Thank you very much for your help.

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42