Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides

Member Profile


evollsixes

Name scott farnan
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 3
Number of Posts 3
Number of Reviews 0
Date Joined Mar 19, 2009
Date Last Access May 11, 2009 8:40 pm
evollsixes's last  
5Hp craftsman snowblower
#1   May 11, 2009 8:40 pm
model number 318 235 516 ......... Hi guys I have a snow blower that was giving to me and the engine works  fine but it wouldnt turn the wheels ...  I took the bottom faceplater  cover off and it seems one of the sprockets is brocken in half . The sheer pin must have not done its job .  Any how im not sure parts are made for this snow thrower anymore  so do you think i could weld this  sprocket back together
Re: How thick are the Gasket on My tecumseh ?
#2   Mar 19, 2009 9:57 pm
Good point. Thank you
How thick are the Gasket on My tecumseh ?
#3   Mar 19, 2009 3:47 pm
Hi guys and gals. I am attemting my first rebuild and wanted to also try making my own gasket.  My mower engine is a tvs100 44050g and I need all new gaskets.  Mounting flange, cylinder head  valve cover , air cleaner  and intak gasket are pretty much all of them i can think of .  I dont know what thickness of paper to buy. Are they all different thickness'   ? Any help would be appreciated .
Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42