Abby's Guide to Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more)
Username Password
Discussions Reviews More Guides

Member Profile


Tek577

Name Matt
Email Address private
AIM
YIM
ICQ
Gender
Age
Location
Personal Quote
Privileges Normal user
Rank
Points 1
Number of Posts 1
Number of Reviews 0
Date Joined Feb 7, 2010
Date Last Access Feb 7, 2010 2:04 pm
Tek577's last  
tecumesh HM80 snowblower motor
#1   Feb 7, 2010 2:04 pm
Just inherited my fathers old snow blower which he hadn't used in a couple of years.    Flushed the gas, added new.  started right up but the unit didnt drive forward.    Like an idiot I tipped it on its side to examine the pressure disc and didnt notice the oil pouring out the carb for a few minutes.     Wouldn't start after that.   Pulled the old spark plug to check for oil in the cylinder.   none came out when i pulled the cord.   Put in new spark plug,  drained old oil and refilled with 5w-30 and it fired right up but will only run on 3/4 choke and full throttle.   TYried adjusting screw on bottom of carb but it just kept stalling out.    Is this because the oil that ran through the carb? Any suggestions would be great.     Also Does anyone have a diagram of the carb?   It may be missing an air filter,   Im obviously not too familiar with these thing or I never would have tipped it on its side.

Thanks matt 

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Guide   •   Discussions  Reviews  
AbbysGuide.com   About Us   Terms of Use   Privacy Policy   Contact Us
Copyright 1998-2024 AbbysGuide.com. All rights reserved.
Site by Take 42