Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Well........finally getting around to starting a thread on this impeller mod for the snowblower.  Perhaps a little late in the season, but it will give us something to talk about!  In light of the recent thread about plastic liners, I thought I should get this started.

I have to admit that when I first heard of this, I was a little skeptical at first.  Sounded interesting but as with most mods, they are usually more hype than improvement.  Some had been telling me about it and said that it made a real improvement.  Yeah, right.  I checked out the web site and, have to admit, I was being drawn in.  Clarence lives in the same city as I do, so this gave me some more interest in checking it out.  Still back burner though.

So.........one day we are out doing driveways and this occasional client that lives across the street from my client sees that I am having a little trouble with the slush getting plugged up in the machine.  He tells me that he just got the kit installed on his machine and is going to give it a try.  Now I know how his machine performs usually, as I have seen him do his driveway  many times over the years, so this should be interesting.  Well, the next thing I know, is that I almost wet myself!   He was blowing that slush out of his machine like it was being shot from a cannon!  Now we all know that slush usually goes about 2 feet, so seeing  this stuff fly 20+ feet was nothing short of unbelievable.  We tried some snow with it and it was going 30-40 feet.  Normally his machine throws about 20-30 feet.  By the next day, I was over at Clarence's and getting it installed on one of my machines, to check it out for myself.  I have NEVER looked back.  Now, ALL of my machines have been fitted.  My favourite machine is an MTD Pro 13/33 (1986) , with the 13 hp B&S engine, and it will honestly throw snow 50-60 feet!    The Ariens and other MTDs have been fitted too.

ABSOLUTELY no snow or slush will slow down this kit! EVERYTHING that goes in, will come out!  EXCEPTIONS include: newspapers and extention cords!  Havn't picked up a squirrel yet!

Most kits now have roughly 2000 times on them now and the belting is holding up quite well. I see no need for any replacement yet.

Installation will require medium skill, I guess, as you will have to remove the chute and drill the impeller to install the kit.  You are working through the opening for the chute. 

For the first several times you use your machine, the sound will be quite different as the rubber will be dragging slightly on the housing until it gets worn in.  THAT MEANS THAT IF YOU CAN'T HANDLE THE PAINT COMING OFF OF THE IMPELLER HOUSING, THEN THIS KIT IS NOT FOR YOU!  It will make the metal quite shiny, I must say.  BUT, if that is not a big deal for you, then the perfoermance upgrade will be more than a fair trade off.  Other than the paint coming off, the metal is not being worn out.  With all the use that my machines get,  they are still in fine shape.  With typical homeowner use, you should still get 50 years out of your machine.

So........which machines are likely candidates?  I would say every 2 stage machine out there, with the exception of Hondas and Yamahas.  They already have a tight gap between the impeller and the housing and would not show any improvement.

Clarence is a super guy and I send all of my equipment to him now, (that I can't fix) for repairs.

Hope this helps.

Got any questions............fire away!

Ken

PS Thanks for the push.............Fred!

Snowpro--Man that does me good that you got something that works that well.  eing from the deep south, I know nothing about snowblowers but from your descrioption of the project,  you really  got lan improvement in performance.   Glad for you and may the rest of your day go well---Your friend--Will

Sounds good.  I know I saw a thread on this before.  What is the name of the kit and could you possibly provide a link to the website?

  Al,

Email me: fonions@ comcast,net

I'll send you the info you want.

                        Fred  

I have one of Clarence's kits on my MTD. It made a modest improvement with throwing powery snow, but it made a significant difference with throwing slushy, wet snow. With our last dumping of wet snow, I finally was able to get my chute to clog up - but the impeller drum area was clear. I TOO, RECOMMEND ONE on ANY 2 stage machine...

Marty

PS - Clarence is VERY knowledgeable & helpful with installation if needed, & also a helluva nice guy...

Clarence's site

My advise is, if you are considering them, don't make your own. Just buy them.

 Rob,

Nice going!!!!

             Fred    

I got stuck between a slush storm and a weekend, so I looked on Clarence's site and confered with someone who has the impeller kit to make my own. The concept works really well. As I found out the materials used are real important. I used what I had and they did not hold up. So now I am on version two, but have not had a chance to use it yet. That's why I say to just buy it if you want to use them. The PITA that is involved with the R&D is not worth the 30 bucks. Clarence already did the testing for you.

My MTD was real easy to do. In addition to taking off the chute, I could remove a portion of the impeller housing. The impeller on the MTD is made of a fly's wing so it was very easy to drill. And the modification does work very well in less than perfect conditions. Most anything can blow powder, even an MTD. Now my MTD can blow slush too. I hate to say, but better than some orange and red machines on my street. How long my machine will last is another question.

we have an ancient murry at work with one of those in ,might be different brand.

serviced the machine and took it outside to try ...boss thought i was crazy and even said why it cant work in this wet heavy snow.we has about 6 inches of real wet stuff almost slush.

it was unbeliveable.never saw anything blow that kind of snow as well as that.

im sure it would do good on a newer machine as well.

later chris

From what I have seen of the newer machines, they need it the most!  As manufacturing gets sloppier to keep the price down,  I have noticed that the gap between the impeller and the housing is getting larger all the time!  The need to make up for this  downward turn, is sadly becoming ever more important.  I have noticed that the impeller blades are getting smaller too.  How are they supposed to throw the snow, fed from the auger, with those tiny things?

I think that a common thread on this site, since I have been around, has been the ability to handle slush.  This kit will make up for that.  Powder just becomes a LOT more fun!

I knew there were a couple of guys here that had the kit too, but I couldn't remember who.  Glad to see you posted!

Ken

I installed clarence's kit last April on my  MTD 10.5 HP Blower.

I never got to try it on slush, but on heavy EOD and powder, I gained about 20% in throw distance!!

I just bought a new blower, and I am going to install the kit on it this summer ( late August ) because it really helps to blow snow!!!

                                                                   Fred