Abby’s Guide > Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) > Discussions > Gas Cans

Outdoor Power Equipment (Lawn Mowers, Snow Blowers, Chain Saws and more) Discussions

Search For:

robmints

Joined: May 13, 2003
Points: 4691

Gas Cans
Original Message Feb 11, 2005 7:39 pm

Any one know of a good way to modify one of these spill proof gas cans to not spill so much gas.

You almost always need to hold the spring loaded nozzle open while you are trying to fill a tank or pour into a funnel. All the while, the you are trying to watch the gas go in the tank at a terribly slow rate. Instead you are knocking over the funnel or pouring the gas down the side of the tank.

I feel like most of the time I am a pretty reasonable, forgiving sort. But I think I would like to see the person that came up with these things tarred and feathered.

What could possibly be the matter with a regular gas can? I can't get mail order, went to PA and Delaware. Forgot to look when I was in NY. Tried to buy a regular spout, doesn't fit the can.

Help.

Replies: 40 - 44 of 44

All

View as Outline

AJace

I have an Ariens 926 Pro because I like Orange

Location: Near Gettysburg
Joined:
Points: 969

Re: Gas Cans
Reply #40 Feb 20, 2005 12:09 am

Richie are you going to make a dolley for you gas can?

Ariens 926 DLE Professional; Toro S200; Craftsman LT1000, Echo ES-230;

Termy

Location: Washington
Joined: Oct 24, 2004
Points: 960

Re: Gas Cans
Reply #41 Feb 20, 2005 12:44 am

We need to pump oil too. Too bad its only for gas and diesal.

Ben07

The more you know about something, the more you find there is to know.

Location: Pittsburgh, PA
Joined: Feb 26, 2004
Points: 178

Re: Gas Cans
Reply #42 Feb 20, 2005 12:02 pm

Hi Richie When you get a chance . check the specs on that pump and see if it gives you the maximum height difference it is capable of raising those fluids. (not lateral length of hose)

No hurry , thx in advance

Ben07

Ariens 8524LE, Toro CCR2000, Jacobsen S-B S-blowers, Generac 10hp Gen-convt. to N.G., 5 L-boys(D's F's &Dura( 74,77,80,88,00), Antiq. 1960 AYP 20 in. mag w 3.5 Tech mower. Ryan/Ryobi gas Trim. AYP 205 gas blwr. Mac c-saw,Toro E-blwr, 2 Weed-E e. stg. trims. outboards, boats, util trail, 2 Jeeps

Richie

Bring On The White Stuff

Location: Long Island, New York
Joined: Dec 12, 2003
Points: 562

Re: Gas Cans
Reply #43 Feb 20, 2005 12:59 pm

Ben07 wrote:

Hi Richie When you get a chance . check the specs on that pump and see if it gives you the maximum height difference it is capable of raising those fluids. (not lateral length of hose)

Ben,

There are no specs for the pump. As it is, it fills my gallon fuel tank quickly. I also made one of those funnel holders that someone else mentioned to the club. Makes the process easier.

AJ...I won't be making a dolley, I'm not crippled just have to be a little careful.

Richie

Walt

Do what you can, with what you have, where you are. -T. Roosevelt

Location: Chester County, PA
Joined: Dec 31, 2004
Points: 148

Re: Gas Cans
Reply #44 Feb 20, 2005 9:10 pm

Rob,

The Walmart here sells 2 types of Blitz gas cans. One is the type we all hate (no spill). They also have another type that has a vented nozzle, (without the usual vent in the back of the can. ) The latter doesn't have a shutoff or anything, and it also fits on the Blitz 5 gallon cans.

I hope this helps

Walt

Replies: 40 - 44 of 44

All

View as Outline